The MOE - Mil-Spec (Magpul Original Equipment) is a replacement stock for AR15/M16 rifles using mil-spec size receiver extension tubes.

Designed for quick and light action, the simplified A-frame profile prevents stalling and protects the release latch to prevent accidental activation.

The Mil-Spec model features a standard 0.8 cm thick rubber cover plate that provides extra grip even with ballistic protection or a vest.

Weight: 226 grams

Length: 17.5 cm

Maximum elongation from folded stock: 7.8 cm

 Not suitable for a HK 416

The Magpul CTR (Compact/Type Restricted) - Mil-Spec is a replacement stock for AR15/M16 rifles using Mil-Spec size receiver extension tubes. Designed for quick and light action, the A-profile avoids snags and protects the release latch to prevent accidental activation.

The CTR also features an additional friction locking system that minimizes excessive lacrosse movements for greater weapon stability and an ambidextrous QD strap holder that accepts any push-button sling pivot.

The Mil-Spec features a standard 0.3" rubber pad, which allows positive shoulder cushioning to prevent slippage even with a bulletproof vest or modular equipment.

Based on the proven MBUS Pro platform, the MBUS Pro Offset Sights is part of an effective sighting system to complement the magnifying optics on the M1913’s Picatinny mounting surfaces. In the case of a damaged or non-functional primary lens, or a nearby target, rotating the rifle to 45 degrees provides the shooter with a complete and fast sighting solution.

The MBUS Pro Offset Rear Sight features a durable Melonited steel construction, positive trigger lock when deployed, tool-free alignment adjustment for easy zeroing, double rear eyelets and a low profile to ensure compatibility and reduce interference with most rifles.

Made in the USA.

The M-LOK hand-stop kit serves as a lightweight, low-profile M-LOK indexing point for better weapon control, or as a front stop to prevent the shooter’s hand from reaching the hot muzzle brake.

The kit includes an M-LOK hand stop, M-LOK index panel and M-LOK type 2 rail cover so that the individual user can configure their kit as they wish.

This kit also includes an adapter for use with polymer hand guards/ hand guards equipped with Magpul M-LOK as well as other aluminum hand guards with wider profile.

Allowing a wider range of mounting location options, the M-LOK AFG is ¾ "shorter than the AFG-2, while retaining a similar grip surface.

Even though the M-LOK AFG is more compact than its predecessors, it takes into account the body’s natural mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more accurate weapon control.

By positioning the shooter’s hand high on the centre line of the barrel, unlike conventional vertical front handles, the M-LOK AFG helps to mitigate recoil and control the weapon to facilitate faster and more accurate continuous fire.

All the necessary material for fixing directly to the M-LOK slots on the aluminium or polymer handrails and futes is included.

The Hand Stop Kit is a covert rail configurable in 4 parts.

It allows a better grip of the hand guard with, in addition, two inserts to maintain the grip.

The innovative design adapts to all QD interfaces of standard size and allows to obtain a less imposing strap assembly that offers a handling of one hand, a high resistance ball head that rotates freely, prevents the strap from turning and channeling to avoid turning, and superior corrosion resistance with a Melonite finish.

The two lateral release tabs prevent accidental release.

Quick disconnect strap for 1-1/4" strap.

To be combined with the MS1 strap for a dedicated two-point strap, or with the MS1 MS4 adapter for a two-to-one convertible strap.

M-Lok® 2-piece rail covers attach directly to most M-Lok® aluminum handrails. 

The TSP texture offers a very good grip while keeping a low profile and completely customizable by mixing elements of different colors.

Set of 6 M-Lok® rail covers separable in 2 parts

The M-LOK™ QD attachment provides a forward attachment point for the Magpul MS4 strap and other QD push button straps.

Made of aluminum, it has beveled edges to reduce snags and an anti-rotation design that prevents swivel swivels.

The Magpul bipod with attachment for Grenadière offers versatility and solidity for an excellent quality/price ratio.

Manufactured to MilSpec standards in 6061 T6 aeronautical aluminum and polymer, it is lightweight and robust.

Its surface is anodized with a precision tolerance that reduces grinding.

The MagLink is a coupler for PMAG 30 and 40 AR15/M4 cartridges* that allows the user to attach two magazines together for faster reloads and keep additional ammunition accessible at all times on the weapon.

The MagLink features a two-piece bolted design and a durable, lightweight reinforced polymer construction.

This coupler is compatible with PMAG 30 and 40 cartridges GEN M2 MOE and GEN M3.

Ladder panels offer a very low profile Picatinny 1913 rail cover.

The Santoprene material provides a rubbery surface for better gun control and rail protection.

Easily cut for custom lengths, each panel fits one side of a rifle length rail (18 slots).

One panel per package.

The Magpul "AR Enhanced Magazine Release" Expanded Charger Plunger offers an expanded contact surface for fast and efficient charger changes.

Easy installation it does not require the action of a gunsmith.

M-LOK Type 1 rail covers have a clean profile and are installed directly on M-LOK compatible systems.

Made of a flexible, lightweight and extremely heat-resistant material, they offer an improved grip surface.

They cover 6 full M-LOK slots, but they can be cut for a custom length or to combine different colors.

1 batch of 2 M-Lok® Type 1 rail covers

The MIAD® (MIssion ADaptable) GEN 1.1 TYPE 1 pistol handle replaces the original handles of most AR15/M4 and some AR10. It allows to have an improved and personalized ergonomics in its hand thanks to its interchangeable front and rear parts. It has an internal storage core for carrying a lubrication bottle.

CLIP Magpul straps for attaching a 1-1/4" weapon strap.

The Paraclip™ is lockable and compatible with ASAP®, RSA®, MSA®, SGA® Receiver Sling Mount and many other sling buckle attachment points.

To be combined with a MS1® strap for a 2-point strap.

Also combines with the MS1® MS3® adapter or the MS1® MS3® QD adapter for a 2-1 point convertible strap.

Cheek clip for MOE and CTR butts.

Raises the position of the cheek by 6.35mm, 12.7mm or 19.05mm depending on the model.

This backrest is intended for applications other than AR15/M4 weapons as the backrest interferes with the arm lever function.

Originally designed for M14 rifle butt conversions.

Magpul strap for picatinny rail, 

live directly on the picatinny rail of your handguard.

The MOE-K2+ handle combines a reinforced polymer body with a comfortable and enveloping rubber overmolding for maximum weapon control in harsh environments.

The MOE-K2 is an upgrade for the AR15/M4 that offers a more vertical grip angle, but in a normal size handle design.

The more pronounced vertical grip angle is optimized for PDW (Personal Defense Weapon) configurations and improves the comfort and control of the short butt rifles that bring the main hand closer to the shooter’s body.

With rubber overmolding for positive weapon control, compatibility with optional Storage Cores for equipment storage, and a unique rear band design for correct finger placement on the trigger, the K2+ brings a modern style, ergonomics and comfort at the AR platform.

The MOE-K2 AK Grip is an upgrade for AK47/AK74 platforms that offers a more vertical grip angle, but in a normal-sized grip design.

The vertical grip angle improves comfort and control over these rifles has shorter butt that bring the main hand closer to the shooter’s body.

With an aggressive TSP texture for positive weapon control, compatibility with optional Storage Cores for equipment storage, and a unique rear band design for correct placement of the trigger finger, K2 brings modern style and ergonomics to the AK platform.

The Magpul Mil-Spec (Adaptable Carbine Stock - Light) is a replacement stock for AR15/M4 rifles using Mil-Spec size butt tubes. A simplified version of ACS, the ACS-L uses the same central storage compartment and the same cheek weld but removes the battery tubes for a finer and lighter set.

The MOE AK handle is designed to improve ergonomics and has an aggressive TSP texture for effective weapon control.

With a single-piece polymer construction and compatibility with Magpul "Grip Cores" for storage customization, this 24° tilt MOE grip is a welcome addition to the iconic AK platform.

The Paraclip QD adapter adapts to push-button QD swivel sockets to allow the use of Paraclips and other clip sling accessories. Made of precision casting Melonite™ finished steel.

Designed for use with MOE Hand Guards and Forends, the MOE Polymer Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc.

Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges.

All hardware necessary for attachment directly to integral mounting slots on MOE Hand Guards and Forends is included. Additional hardware may be necessary for other applications.

Size L2 (5 Slots), max overall length of 2.5". Mounting screw center-to-center of 1.2".

Designed for use with MOE Hand Guards and Forends, the MOE Polymer Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc.

Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges.

All hardware necessary for attachment directly to integral mounting slots on MOE Hand Guards and Forends is included. Additional hardware may be necessary for other applications.

Size L3 (7 Slots), max overall length of 3.3". Mounting screw center-to-center of 1.6".

Pack : 3x 

Pack : 3x 

Designed for use with MOE Hand Guards and Forends, the MOE Polymer Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc.

Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges.

All hardware necessary for attachment directly to integral mounting slots on MOE Hand Guards and Forends is included. Additional hardware may be necessary for other applications.

Size L4 (9 Slots), max overall length of 4.1". Mounting screw center-to-center of 2.4".

Pack of 3 5.56 calibre cartridge 5 limiters for PMAG gen3

Pack of 3 limiters of 10 cartridges 5.56 calibre for PMAG

Pack of 3 limiters of 5 cartridges calibre 7.62x51 for PMAG gen 3

Pack of 3 limiters of 10 cartridges calibre 7.62x51 for PMAG gen 3

The XTM Enhanced Rail Panels are low-profile, two-piece covers that attach anywhere on a 1913 Picatinny rail without having to remove previously mounted accessories. Replacing the original XTM Panels, The Enhanced XTM Panels feature an aggressive anti-slip texture and dual-side routing clips for retention of light/laser cables. The design and reinforced material construction ensure the panels will remain in place under all operating conditions, but allows for easy removal using the tips of two rounds when necessary. 

Pack x4

Combine with the MS1™ Sling and Paraclip™ to provide two to one-point convertibility.

Melonite™ finished steel and reinforced polymer hardware combined with custom snag-free, high durability 1-1/4" webbing.

The Rubber Butt-Pad, 0.30" comes standard with the CTR® and MOE® Mil-Spec models as well as all STR™, ACS-L™, ACS™ and UBR® stocks and utilizes a firm rubber that is designed for enhanced shoulder purchase and improved impact/drop mitigation. May also be installed on Commercial-Spec MOE/CTR stocks, but may prohibit use of fully collapsed position. All mounting hardware included.

The Rubber Butt-Pad comes standard with the CTR® and MOE® Mil-Spec models as well as all STR™, ACS-L™, ACS™ and UBR® stocks and utilizes a firm rubber that is designed for enhanced shoulder purchase and improved impact/drop mitigation. May also be installed on Commercial-Spec MOE/CTR stocks, but may prohibit use of fully collapsed position. All mounting hardware included.

The MagLink is a coupler for PMAG 30 and 40 cartridges 7.62x34 type ak that allows the user to attach two magazines together for faster reloads and keep additional ammunition accessible at all times on the weapon.

The MagLink features a two-piece bolted design and a durable, lightweight reinforced polymer construction.

The M-LOK MVG is a light weight, inexpensive vertical foregrip that attaches directly to M-LOK compatible hand guards and forends with no additional Picatinny rails required. Made from the same high quality polymer as other Magpul products, the M-LOK MVG uses the new Magpul TSP texture for positive control in all environments. 

The four-piece XTM Hand Stop Kit serves as a lightweight, low-profile rail mounted index point for improved weapon control, or as a forward stop to prevent the shooter's hand from reaching the hot front sight assembly or muzzle. The kit includes one Hand Stop, one Index Panel, one full XTM Enhanced Panel, and one XTM Enhanced Half Panel.

video

Designed for use with 1913 Picatinny railed hand guards, the RVG is a basic, light weight, cost-effective vertical fore grip.

Includes all mounting hardware plus a universal mounting rail for custom fitting to many factory plastic hand guards.

The Rail Light Mount fits on any standard 1913 Picatinny Rail, is available in right or left side models, and integrates with the Magpul XTM panels. It positions the weapon light high and cantilevered forward, at the 11 o'clock or 1 o'clock position, to allow a more forward support hand position, keep the light tucked in close to the bore, and to minimize barrel shadow. A textured thumb ramp is integrated to provide the user an index point, aiding consistent hand placement and light activation.

The Rail Light Mount fits on any standard 1913 Picatinny Rail, is available in right or left side models, and integrates with the Magpul XTM panels. It positions the weapon light high and cantilevered forward, at the 11 o'clock or 1 o'clock position, to allow a more forward support hand position, keep the light tucked in close to the bore, and to minimize barrel shadow. A textured thumb ramp is integrated to provide the user an index point, aiding consistent hand placement and light activation.

Compatible with most any 1913 Picatinny-railed hand guard, the Magpul AFG (Angled Fore-Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore-grips, the AFG helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots.

The AFG-2 is a slim line design that is shorter in overall length and width compared to the original AFG. Smaller size allows for mounting on a wider variety of railed hand guards and better compatibility with rail covers and accessory mounts. Compatible with most any M1913 Picatinny-railed hand guard, the Magpul AFG-2 (Angled Fore Grip) takes into account natural body mechanics and provides a comfortable and stable user interface that reduces fatigue and allows for more precise weapon control. By positioning the shooter's hand high on the centerline of the bore, unlike conventional vertical fore grips, the AFG-2 helps mitigate recoil and control the weapon to facilitate faster, more accurate follow-up shots.

The MBUS (Magpul Back-Up Sight) is a low-cost, color injection molded, folding back-up sight.

The dual aperture MBUS Rear Sight is adjustable for windage and fits most 1913 Picatinny rail equipped weapons, but is specifically tailored to the AR15/M16 platform.