RemovabRemovable insulation liner compatible with all P-40 and Striker pants

With this lining, you can convert all your P-40 or Striker range pants into cold pants.

Once inserted, the lining protects against wind and insulates against the cold.

The fixing is provided by a slide at the waist

Anatomical section

Antistatic

Windproof and breathable

Flat seams

le insulation lining compatible with all P-40 and Striker pants

With this lining, you can convert all your pants from the P-40 or Striker range into cold pants.

Once inserted, the lining protects the wind and insulates against the cold.

The fastening is ensured by a slide at the waist

Anatomical cut - Antistatic - Windproof and breathable - Flat seams

Uf Pro® flex pads are made for your activities that require knee cushioning.

No external fastening is required, just insert the knee pads into the P-40 or Striker pants

The inserts are available in thickness 6 or 8 mm. The 8mm version gives you better cushioning and is lighter. However, being thicker, it completely fills the pocket and decreases air diffusion at this level.

Delivered in pairs

SAS-TEC energy-absorbing memory foam

Contents: 2x UF PRO FLEX SAS TEC Elbow Protector Impact

Weight: 35 grams / per elbow guard

The Monsoon XT Uf Pro® trousers provide reliable rain protection for operators.

Specially designed to meet the highest quality requirements in terms of rain protection, but also to offer unparalleled mobility.

Made of Gore-Tex® 3 layers laminate, they can be easily stored in the smallest backpacks. The long double-slider side zippers allow you to put on your Monsoon overpants without having to take off your shoes and give easy and easy access to the pockets of your pants worn underneath. 

YKK® long side slides and double slider water repellents

Extended rear part made of elastic materials

Adjustable legs

Shoe covers with hook

Detachable shoulder straps

Pocket configuration:

The Monsoon XT trousers include:

Thigh pocket plated with water-repellent slider YKK®

Two pockets in the back part

The ultimate combat pants in hot environments

Schoeller-Dynamic®, Ripstop Poly/cotton and Cordura® stretch materials. 

"Fire and Forget" knee protection

Reliable protection against shocks or sharp objects 

Flexible inserts are knee-shaped. 

13 pockets 

In low temperature conditions, an inner slide allows you to attach a Windstopper® liner inside.

Ventilation rails at groin level

Double belt buckles for attachment of service or combat belts

Elastic in the belt

Uf Pro® triple layer knee protection system

Width-adjustable leg bottom zippered

Drawstring at the bottom of the legs

Double-slider slider rod

Zipper for removable inner lining

Hook for shoes

2 open front pockets

1 internal zipped pocket to the left front pocket 

2 zipped back pockets

2 pockets on the thigh 

2 thigh pockets with double access and internal compartment

2 laptop pockets plated on thigh pocket

2 lower leg pockets on the calf on the outside

Extremely sturdy construction, Ripstop fabric, pocket configuration and knee protection make it the ultimate combat pants.

Aerodynamic construction for minimal risk of hanging on 

Reinforcement at each seam 

Compatible with UF PRO knee pads 

Extremely durable Schoeller Dynamic Stretch panels

11 pockets,

Integrated hooks along the hem to secure the pants to the boots 

Compatible with UF PRO Windstopper windproof lining.

 2x hand pockets.

1x Security pocket with zipper in left insertable pocket.

2x back pockets with velcro flap.

2x multifunction pockets on the thighs with button flap, zippered side access, elastic drawstring and internal separation.

2x pockets on the thighs with button flap  

2x pockets on the thighs 

2x lower leg pockets with zipper.

Dorsal part raised and padded.

Double belt loops reinforced in CORDURA®.

Schoeller-Dynamic Stretch material in the upper back and buttocks.

Stretch inserts at the waist.

Adjustment of the width of the knees.

Adjustable width at the bottom of the legs.

Double zipper rod, slotted button and clamping hook.

Inner zip for WINDSTOPPER® lining

Instep and knees reinforced in CORDURA®.

Adjustable hem with hooks for boots.

6 belt loops in CORDURA

Schoeller-Dynamic® stretch materials, RipStop Poly/cotton (or Nyco for camouflage versions) and cordura®. 

Double belt buckles for attachment of service or combat belts

Uf Pro® triple layer knee protection system

Width-adjustable lower leg thanks to a zipper

Drawstring at the bottom of the legs

Braguette with double slider slider

Zipper for removable inner lining

Hook for shoes

2 open front pockets

1 internal zipped pocket to the left front pocket (ideal for change)

2 zipped back pockets

2 pockets on the thigh for knife or magazine

2 thigh pockets with double access and internal compartment

2 laptop pockets plated on thigh pocket

2 lower leg pockets on the calf on the outside

If there is a drop in temperatures, you can fit your Striker XT pants with a Windstopper lining.

UF PRO Waist/Flex System

Belt loops reinforced in CORDURA®.

Double fly zipper and hook closures.

Non-slip strip at the back of the waist.

Scholler-dynamic® stretch fabric at the knees and buttocks.

NyCo Extreme Ripstop fabric.

Front pockets with mesh ventilation openings and additional knife pocket.

Discreet security pocket.

Large side pockets with button closure, integrated elastic inner buckles and elastic grip strap on the top edge.

Versatile pocket on the thigh with mesh ventilation openings and side pocket accessible horizontally and vertically.

Pockets for knee pads made of technological material 37.5™.

Additional pocket for UF PRO Solid knee pads.

Knee area reinforced in CORDURA®.

Adjustable knee width.

Lower leg area adjustable in width.

Mesh ventilation openings at the legs.

Hooks for boots.

The P-40 series offers almost unlimited comfort and mobility. Based on the success of its trouser models, Uf Pro® has designed shorts for hot days.

The P-40 shorts are based on a new concept in order to achieve maximum comfort and mobility.

Schoeller-Dynamic® stretch materials, RipStop Poly/cotton.

The shorts offer a total of 11 pockets

The P-40 shorts allow you to directly connect your belt with double buckles. 

Double belt buckles for attachment of service or combat belts

Elastic in the belt

Braguette with double slider slider

Zipper for removable inner lining

Pocket configuration:

2 open front pockets

1 internal zipped pocket to the left front pocket (ideal for change)

2 zipped back pockets

2 pockets on the thigh for knife or magazine

2 pockets plated on the thigh pocket for mobile

2 thigh pockets with double access and internal compartment

Polycotton Ripstop fabric very resistant to abrasion

Teflon, UV and IR treatment according to NATO elms

Mosquito repellent treatment with Permethrin

Elastic belt

Quick closure of the lower legs by press button

2 cargo pockets with double loader door 5.56

Water evacuation eyelet

Reinforcements between legs and knees

Equipped with many pockets (11 in total)

Pocket configuration:

2X Front sleeves

2X Back pockets

1X Security Pouch

2X Multifunctional dual-access side pocket with elastic retentions

2X thigh pocket with zipper retention system

2X Mag / knife / pocket marker

2X Large pockets on the lower legs

Ergonomic 3-layer UF PRO® knee protection system, lined with 37.5™ moisture wicking material

Knee width regulators

Leg area adjustable in width

Double zipper braguette

CORDURA® reinforcements at the instep and knees

Boot hook 

Adjust the knee width of the STRIKER X combat pants by adjusting the straps (

Rubber line inside the pants to hold the clothes from the upper body

CORDURA reinforced double belt loops 

Extremely resistant SCHOELLER stretch panels

Detachable inner zipper for WINDSTOPPER® lining

Elastic cord with cordlocker for better fit. 

Canadian button to fix the legs on the belt buckles or the belt itself.

Shoe clip with storage option in case of no 

10 CFIX loops Per leg adapted to be completed with beings used with natural vegetation or other

This product can also be used to camouflage equipment, for example, you can easily cover a rifle or a large telephoto lens.

One size fits all. Also suitable for winter clothing

Access to the leg pocket

Volume: Approx. 1.5l / approx. 242g

Delivered in pairs

IRR

New UF PRO Striker XT Gen.3 combat pants.

Waist/Flex system, which allows it to be individually and precisely adjusted to the size.

Lightweight, breathable stretch inserts to achieve exactly the right level of stretch at the waist

Integrated bottom belt secures the pants in its position and prevents it from sliding down or up.

The 3D padding for the lower back adapts to the curvature of the lumbar area and fills the space between the body and the trouser belt.

Ventilation openings on the legs with a zipper.

Integrated mosquito net lets in fresh air 

5-level knee height adjustment is comfortably hidden in the large side pocket

17 pockets offer ample storage space

UF PRO Waist/Flex system.

Schoeller® dynamic stretch fabric 

Belt loops reinforced in CORDURA®.

Additional Velcro in belt loops for better underbelt fit.

UF PRO® 3-layer knee protection system

Additional pocket for UF PRO Solid knee pads.

2X large ventilation openings with mosquito net at the thighs.

5-level vertical knee adjustment system.

Adjustable width at the bottom of the leg with Canadian button and vertical zipper.

Trouser bottoms reinforced in CORDURA®.

Inner zipper for removable WINDSTOPPER® lining.

Uf Pro® flex pads are made for your activities that require knee cushioning.

No external fastening is required, just insert the knee pads into the P-40 or Striker pants

The inserts are available in thickness 6 or 8 mm. The 8mm version gives you better cushioning and is lighter. However, being thicker, it completely fills the pocket and decreases air diffusion at this level.

Delivered in pairs

Excellent damping properties

Ability to form according to knee geometry

Lightweight

3D tactical knee pads feature a special multidimensional shape that instantly adapts to your knees 

Protective material gives you the protection you need. 

You will easily forget that you wear them thanks to their lightness (only 71g / knee pad) and the absence of periodic readjustment with additional cords.

The IMPACT version is made of a special material that gives you comfort and - when you need it most - maximum protection. 

Under normal conditions, each tampon is very flexible. But at the moment of impact, they stiffen to ensure the safety of your knees.

These lightweight pants have been designed for a wide range of tactical applications, as well as for shooting or daily wearing. The mechanical stretch fabric ensures you superior freedom of movement. The articulated knee area offers increased comfort and freedom of movement.

A small pocket integrated at the back is ideal for storing a back or a gun charger. The edges of the pockets are reinforced for better durability. Cargo pockets mounted on the front have a separate compartment for storing a phone or other gadgets.

Features:

- Adjustable lower leg

- Articulated knee area for maximum comfort

- Mechanical stretch fabric

- Durable water repellent coating

- Innovative pocket concept

The Operator Combat Pant is designed with shape and versatility in mind. Compared to the Raider MK.IV pants, it is reduced to the essentials of a mission pants.

It has an improved size adjustment system and elastic components for better comfort and optimal freedom of movement. Integrated side pockets provide ample space and a separate smartphone compartment 

A small pocket on the outside of the thigh is ideal for storing a knife or a gun charger.

The knee protection area is equipped with a very practical inner adjustment of the knee position. The modular knee protection compartment allows the use of a wide range of different pads (inserts) and different brands.

The fabric at the knees is designed to evacuate moisture in order to absorb quickly and optimally any perspiration. It also has a hook for securing to the laces at the bottom of the leg, preventing the pants from moving upwards.

«YKK» zippers and high quality sewing threads are used in the making of these pants. All main seams are triple stitched for added durability. In addition, many breakpoints are reinforced at points of extreme stress.

- Excellent wearing comfort, perfect fit and freedom of movement

- Reduced to the essentials of combat pants

- Optimized for Rigger Belt and safety belt types

- Knee pads compartments and knee height adjustment

- Triple stitched main seams, areas reinforced by breakpoints

- Reduced infrared signature and robust materials

The Enforcer Flex Pant is a truly versatile platform, combining all the essentials of lightweight, modern combat pants with advanced tactical pants. The mechanical stretch fabric ensures superior comfort and freedom of movement. The Compartments knee to equip from the inside ensures protection of the knees. It also has a hook for securing to the laces at the bottom of the leg, preventing the pants from moving upwards. The built-in cargo pockets have a separate compartment for storing a smartphone or other gadgets and tools. Waist straps and adjustment loops are also included to keep your retainer cord in a secure position.

- Hooks for laces

- Compartments for adding knee pads

- Mechanical stretch fabric

- Integrated cargo pockets

- Size adjustment system

The Raider MK IV has been optimized in its pockets, its cargo pockets have been enlarged with internal zip pockets. But also an additional compartment accessible from the outside allowing quick access to a 30 standard charger.

The big highlight of these Clawgear pants is its knee protection zone, which is now equipped with an inner adjustment to position the knee.

Its modular protection compartment allows the use of a wide range of PADS of different brands.

Equipements-militaire.com especially recommends the pads Clawgear TRUST HP also available on our site.

This pad can be installed via the 4 buttonholes that have been directly integrated into the design of the pants.

The COOLMAX knee-level fabric is designed to remove moisture in order to absorb sweat optimally.

The belt area is optimized for seat and carry belts as well as for shoulder straps.

All the main seams have been tripled to reinforce the durability of use of the trousers and its possible friction.

IKK closure.

Pockets at the calves.

Small cord to secure small material.

Specific pocket for knife and charger FAMAS/M4/PMAG.

Adjustment of knee height.

Lining in knee region in Coolmax (100% polyester).

material: NIR polycoton (50% polyamide, 50% cotton).

Weight: 1050gr