Armament accessories
-
Sac à Fusil Modulable
Price €180.00 -
Montage VORTEX rail 45°
Price €66.00 -
Camo tape for armament
Price €89.993-piece rifle camouflage fits different rifle models from HK416 to AX50.
(Bipod, stock, barrel + scope)
The main room covers most of the weapon. This piece consists of two tubes sewn together.
Slide the muzzle towards the bezel.
Then you will find the optical coverage. Just slide it over the bezel and you'll have one of the rubber bands with drawstring lockers on the front.
On the ocular side you have a simple elastic loop to fix it.
The bipod camouflage has two tubes, which are connected by an elastic band and a cordlocker. Just slide it on the bipod
For shooting on the firing range: Slide the cover a little backwards, to avoid damage from hot gases. If you shoot a lot, be sure to remove the camouflage before the barrel gets too hot!
CFIX loops for vegetation
IRR Colors
-
Olight PL-3 Valkyrie Light
Price €95.95Puissance Max. 1300lm
Portée Max. 225m
Intensité Lumineuse 12500cd
Piles Compatibles CR123A 1600mAh OLIGHT
Type de Charge Non-rechargeable
Mode de Fonctionnement 2 interrupteurs à l'arrière
Série Valkyrie
MODES D'ÉCLAIRAGE (PUISSANCE ; AUTONOMIE)
Haut 1300 à 450 à 200lm ; 255m ; 1,5+82+43min
Faible 200lm ; 90m ; 270min
Étanchéité IPX6
-
Olight Baldr S Light
Price €155.95Puissance Max. 800 lumens
Portée Max. 130 mètres
Intensité Lumineuse 4400 candela
Piles Batterie lithium-polymère 380mAh, 3,7V (intégrée)
Type de Charge Câble magnétique MCC spécifique
Mode de Fonctionnement 2 interrupteurs à l'arrière
MODE 1 - NIVEAU HAUT
Puissance 800 à 300 lumens
Autonomie avec laser 1+2+30 minutes
Autonomie sans laser 1+2+37 minutes
Portée 130m
MODE 2 - NIVEAU BAS
Puissance 100 lumens
Autonomie avec laser 90 minutes
Autonomie sans laser 140 minutes
Portée 45m
MODE 3 - LASER VERT UNIQUEMENT
Autonomie 5h
Étanchéité IPX4
CONTENU DU COLIS
1* BALDR S (batterie intégrée)
1* Adaptateur pour rail 1913 (MIL-STD-1913)
1* Câble de charge magnétique MCC spécifique
2* Vis d'assemblage à tête creuse HM2,5*4,5
1* Clé Allen H1,5
1* Vis de pression à pointe ovale
1* Vis de pression à pointe conique
2* Vis de réglage à six pans creux M3x4
1* Manuel d'utilisation
-
PICATINNY INTERFACE FOR SPUHR MOUNTING
Price €53.86SPUHR mounting rail, allows to mount any accessory compatible with the picatinny system.
-
BUBBLE LEVEL - SPUHR
Price €95.00External bubble level assembly designed to attach forward to the bezel support body or ring.
Perfect solution for shooters who can’t focus on the integrated level in the standard ISMS series or who have a model without an integrated level.
The angle of the connection can be adjusted with two adjustment screws. Includes screws.
Weight: 20 g
-
SPUHR SCOPE UPGRADE KIT
Price €37.00System to quickly upgrade a bezel with its weapon.
The kit is particularly useful when using two rings instead of a one-piece assembly.
-
INTERFACE FOR RED-DOT SPUHR
Price €53.83System to install a red-dot on the SPUHR mounts, whether of bezel or spotting scope.
Ideal for self-defense or short range shooting.
-
SPUHR UPGRADE KEY
Price €26.2610 degree leveling key to adjust bezel rotation.
For SPUHR mounting only.
Also known as «corner», Included with all standard height SPUHR monoblock fixtures.
-
CANTILEVER ASSEMBLY - SPUHR
Price €399.00The SPUHR cantilever assembly is designed to mount a bezel on an AR type weapon.
It allows to have the bezel a little more forward than a conventional mounting.
The machining quality is perfect and allows many configurations.
A bubble level is integrated into each installation.
A key allows to upgrade the bezel with mounting.
On the rings it is possible to mount various accessories, such as a Picatinny rail for the addition of a Red Dot Reflex or an attachment for a night vision system.
-
MONOBLOCK MOUNT 34MM SPUHR
Price €369.00The SPUHR monoblock assembly is considered one of the best in the world.
The machining quality is perfect and allows many configurations.
A bubble level is integrated into the assembly.
A clever key system is used to perfectly upgrade the bezel with mounting.
On the assembly it is possible to mount various accessories such as a Picatinny rail for the addition of a Red Rot Reflex, a night vision system. an inclinometer, etc
-
ERATAC COSINE INCLINOMETER
Price €265.00This system is part of the mandatory package when shooting on site, whether in the mountains or in urban areas.
Let’s take the example of a shot at 800 meters from a cosine angle . 74.
The corrected distance will be 800 x 0.74 = 592 meters or nearly 200 meters less, which is huge in view of the arrow of a bullet.
-
BUBBLE LEVEL FOR PICATINNY ERATAC RAILS
Price €127.50The ERATAC Bubble Level attaches to any Picatinny rail.
Bubble protected by a rotating cover.
Can be placed left or right.
-
ERATAC MOUNTING BUBBLE LEVEL
Price €79.00Rail Picatinny 5 Slots, allows mounting red stitch and various accessories on ERATAC fixtures.
Length 55mm
Height 10mm
It is fixed with Torx screws, included.
-
SET 1 DELUXE FIX IT STICKS SPURH MOUNT
Price €139.00The pack contains 16 different heads, two 25- and 45-pound bits and 2 handles or a T-handle.
All in a cordura deluxe kit.
Our point of view:
The FIX IT STICK removable screwdrivers have the characteristic of having bits calibrated according to the desired torque. Each tip has a specific torque and is recognizable by a color code. The tightening torques we propose are those recommended for the assembly of glasses
SPUHR and equivalents.
(45 pounds for mounting clamping and 25 pounds for ring clamping).
-
KIT FIX IT STICKS THE WORKS
Price €295.00The pack contains the complete cleaning kit for your weapons and lenses in a Soft pouch.
Tools Specific Glock, 1911,AR15, Cal.12
T-Handle Wrench
65 Inch Lbs miniature torque limiter
45 Inch Lbs miniature torque limiter
25 Inch Lbs miniature torque limiter
15 Inch Lbs miniature torque limiter
1/2" Socket and Bit Adapter
Universal Choke Tube Wrench
1911 Bushing Tool
Glock Front Sight Bit
Mini Pry-Bar
Bolt Carrier Group Scraper
Metal Pin Punch
Castle Nut Wrench
Bronze Scraper
Steel Pick
Non-Marring Plastic Pin Punch
Cleaning Brush Bit
A2 Front Sight Adjustment Bit
Set of Brass Cleaning Rods (can accept 8-32 threaded attachments)
Set of two bit adapters to allow for 8-32 threaded components
24 Chrome Plated 1/4" Bits
Magnetic Patch
Soft Carrying Case
-
KIT AR15 FIX IT STICKS DUO
Price €255.00The pack contains the complete cleaning kit of your AR15 in a Soft pouch,
to which is added the clamping tools to the cut necessary for mounting your optics or accessories screwed on your AR.
Set of Fix It Sticks
Bolt Carrier Group Scraper
Metal Pin Punch
Castle Nut Wrench
Bronze Scraper
Steel Pick
Non-Marring Plastic Pin Punch
Cleaning Brush Bit
A2 Front Sight Adjustment Bit
Set of Brass Cleaning Rods (can accept 8-32 threaded attachments)
Set of two bit adapters to allow for 8-32 threaded components
12 Chrome Plated 1/4" Bits
Soft Carrying Case
Têtes de serrage au couple 15 . 25 . 45 . 65"/lbs
-
KIT AR15 FIX IT STICKS
Price €105.00The pack contains the complete cleaning kit for your AR15 in a Molle pouch.
Set of Fix It Sticks
Bolt Carrier Group Scraper
Metal Pin Punch
Castle Nut Wrench
Bronze Scraper
Steel Pick
Non-Marring Plastic Pin Punch
Cleaning Brush Bit
A2 Front Sight Adjustment Bit
Set of Brass Cleaning Rods (can accept 8-32 threaded attachments)
Set of two bit adapters to allow for 8-32 threaded components
12 Chrome Plated 1/4" Bits
Soft Carrying Case
-
MAGPUL MIL-SPEC MOE STOCK
Price €62.00The MOE - Mil-Spec (Magpul Original Equipment) is a replacement stock for AR15/M16 rifles using mil-spec size receiver extension tubes.
Designed for quick and light action, the simplified A-frame profile prevents stalling and protects the release latch to prevent accidental activation.
The Mil-Spec model features a standard 0.8 cm thick rubber cover plate that provides extra grip even with ballistic protection or a vest.
Weight: 226 grams
Length: 17.5 cm
Maximum elongation from folded stock: 7.8 cm
Not suitable for a HK 416
-
MIL-SPEC CTR STICK - MAGPUL
Price €89.90The Magpul CTR (Compact/Type Restricted) - Mil-Spec is a replacement stock for AR15/M16 rifles using Mil-Spec size receiver extension tubes. Designed for quick and light action, the A-profile avoids snags and protects the release latch to prevent accidental activation.
The CTR also features an additional friction locking system that minimizes excessive lacrosse movements for greater weapon stability and an ambidextrous QD strap holder that accepts any push-button sling pivot.
The Mil-Spec features a standard 0.3" rubber pad, which allows positive shoulder cushioning to prevent slippage even with a bulletproof vest or modular equipment.
-
MBUS PRO REMOTE SIGHTS - MAGPUL
Price €116.00Based on the proven MBUS Pro platform, the MBUS Pro Offset Sights is part of an effective sighting system to complement the magnifying optics on the M1913’s Picatinny mounting surfaces. In the case of a damaged or non-functional primary lens, or a nearby target, rotating the rifle to 45 degrees provides the shooter with a complete and fast sighting solution.
The MBUS Pro Offset Rear Sight features a durable Melonited steel construction, positive trigger lock when deployed, tool-free alignment adjustment for easy zeroing, double rear eyelets and a low profile to ensure compatibility and reduce interference with most rifles.
Made in the USA.
-
M-LOK HAND STOP KIT - MAGPUL
Price €34.50The M-LOK hand-stop kit serves as a lightweight, low-profile M-LOK indexing point for better weapon control, or as a front stop to prevent the shooter’s hand from reaching the hot muzzle brake.
The kit includes an M-LOK hand stop, M-LOK index panel and M-LOK type 2 rail cover so that the individual user can configure their kit as they wish.
This kit also includes an adapter for use with polymer hand guards/ hand guards equipped with Magpul M-LOK as well as other aluminum hand guards with wider profile.
-
FRONT HANDLE M-LOK AFG - MAGPUL
Price €35.50Allowing a wider range of mounting location options, the M-LOK AFG is ¾ "shorter than the AFG-2, while retaining a similar grip surface.
Even though the M-LOK AFG is more compact than its predecessors, it takes into account the body’s natural mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more accurate weapon control.
By positioning the shooter’s hand high on the centre line of the barrel, unlike conventional vertical front handles, the M-LOK AFG helps to mitigate recoil and control the weapon to facilitate faster and more accurate continuous fire.
All the necessary material for fixing directly to the M-LOK slots on the aluminium or polymer handrails and futes is included.
-
XTM HAND STOP KIT - MAGPUL
Price €28.50The Hand Stop Kit is a covert rail configurable in 4 parts.
It allows a better grip of the hand guard with, in addition, two inserts to maintain the grip.
-
QDM STRAP RING - MAGPUL
Price €38.50The innovative design adapts to all QD interfaces of standard size and allows to obtain a less imposing strap assembly that offers a handling of one hand, a high resistance ball head that rotates freely, prevents the strap from turning and channeling to avoid turning, and superior corrosion resistance with a Melonite finish.
The two lateral release tabs prevent accidental release.
Quick disconnect strap for 1-1/4" strap.
To be combined with the MS1 strap for a dedicated two-point strap, or with the MS1 MS4 adapter for a two-to-one convertible strap.
-
M-LOK TYPE 2 RAIL COVERS - MAGPUL
Price €18.50M-Lok® 2-piece rail covers attach directly to most M-Lok® aluminum handrails.
The TSP texture offers a very good grip while keeping a low profile and completely customizable by mixing elements of different colors.
Set of 6 M-Lok® rail covers separable in 2 parts
-
M-LOK QD STRAP CLIP - MAGPUL
Price €27.50The M-LOK™ QD attachment provides a forward attachment point for the Magpul MS4 strap and other QD push button straps.
Made of aluminum, it has beveled edges to reduce snags and an anti-rotation design that prevents swivel swivels.
-
BIPOD GRENADIER ATTACHMENT - MAGPUL
Price €189.90The Magpul bipod with attachment for Grenadière offers versatility and solidity for an excellent quality/price ratio.
Manufactured to MilSpec standards in 6061 T6 aeronautical aluminum and polymer, it is lightweight and robust.
Its surface is anodized with a precision tolerance that reduces grinding.
-
MAGLINK CHARGER COUPLER FOR PMAG - MAGPUL
Price €25.50The MagLink is a coupler for PMAG 30 and 40 AR15/M4 cartridges* that allows the user to attach two magazines together for faster reloads and keep additional ammunition accessible at all times on the weapon.
The MagLink features a two-piece bolted design and a durable, lightweight reinforced polymer construction.
This coupler is compatible with PMAG 30 and 40 cartridges GEN M2 MOE and GEN M3.
-
SCALE PICATINNY RAIL PROTECTION - MAGPUL
Price €17.95Ladder panels offer a very low profile Picatinny 1913 rail cover.
The Santoprene material provides a rubbery surface for better gun control and rail protection.
Easily cut for custom lengths, each panel fits one side of a rifle length rail (18 slots).
One panel per package.
-
EXPANDED LOADER PLUNGER - MAGPUL
Price €29.00The Magpul "AR Enhanced Magazine Release" Expanded Charger Plunger offers an expanded contact surface for fast and efficient charger changes.
Easy installation it does not require the action of a gunsmith.
-
M-LOK TYPE 1 RAIL COVERS- MAGPUL
Price €22.50M-LOK Type 1 rail covers have a clean profile and are installed directly on M-LOK compatible systems.
Made of a flexible, lightweight and extremely heat-resistant material, they offer an improved grip surface.
They cover 6 full M-LOK slots, but they can be cut for a custom length or to combine different colors.
1 batch of 2 M-Lok® Type 1 rail covers
-
MIAD GRIP GEN 1.1 TYPE 1 - MAGPUL
Price €49.00The MIAD® (MIssion ADaptable) GEN 1.1 TYPE 1 pistol handle replaces the original handles of most AR15/M4 and some AR10. It allows to have an improved and personalized ergonomics in its hand thanks to its interchangeable front and rear parts. It has an internal storage core for carrying a lubrication bottle.
-
MOE ENHANCED ALUMINUM SADDLE - MAGPUL
Price €24.00 -
PARACLIP - MAGPUL
Price €14.80CLIP Magpul straps for attaching a 1-1/4" weapon strap.
The Paraclip™ is lockable and compatible with ASAP®, RSA®, MSA®, SGA® Receiver Sling Mount and many other sling buckle attachment points.
To be combined with a MS1® strap for a 2-point strap.
Also combines with the MS1® MS3® adapter or the MS1® MS3® QD adapter for a 2-1 point convertible strap.
-
CHEEK REST FOR MOE AND CTR STICKS - MAGPUL
Price €23.50Cheek clip for MOE and CTR butts.
Raises the position of the cheek by 6.35mm, 12.7mm or 19.05mm depending on the model.
This backrest is intended for applications other than AR15/M4 weapons as the backrest interferes with the arm lever function.
Originally designed for M14 rifle butt conversions.
-
PICATINNY STRAP RING - MAGPUL
Price €39.00Magpul strap for picatinny rail,
live directly on the picatinny rail of your handguard.
-
MOE K2 + HANDLE FOR AR - MAGPUL
Price €29.90The MOE-K2+ handle combines a reinforced polymer body with a comfortable and enveloping rubber overmolding for maximum weapon control in harsh environments.
The MOE-K2 is an upgrade for the AR15/M4 that offers a more vertical grip angle, but in a normal size handle design.
The more pronounced vertical grip angle is optimized for PDW (Personal Defense Weapon) configurations and improves the comfort and control of the short butt rifles that bring the main hand closer to the shooter’s body.
With rubber overmolding for positive weapon control, compatibility with optional Storage Cores for equipment storage, and a unique rear band design for correct finger placement on the trigger, the K2+ brings a modern style, ergonomics and comfort at the AR platform.
-
MOE K2 AK HANDLE - MAGPUL
Price €25.00The MOE-K2 AK Grip is an upgrade for AK47/AK74 platforms that offers a more vertical grip angle, but in a normal-sized grip design.
The vertical grip angle improves comfort and control over these rifles has shorter butt that bring the main hand closer to the shooter’s body.
With an aggressive TSP texture for positive weapon control, compatibility with optional Storage Cores for equipment storage, and a unique rear band design for correct placement of the trigger finger, K2 brings modern style and ergonomics to the AK platform.
-
ACS-L MIL-SPEC STICK - MAGPUL
Price €119.00The Magpul Mil-Spec (Adaptable Carbine Stock - Light) is a replacement stock for AR15/M4 rifles using Mil-Spec size butt tubes. A simplified version of ACS, the ACS-L uses the same central storage compartment and the same cheek weld but removes the battery tubes for a finer and lighter set.
-
MOE HANDLE AK47 / AK74 - MAGPUL
Price €25.50The MOE AK handle is designed to improve ergonomics and has an aggressive TSP texture for effective weapon control.
With a single-piece polymer construction and compatibility with Magpul "Grip Cores" for storage customization, this 24° tilt MOE grip is a welcome addition to the iconic AK platform.
-
STANDARD/QD TETHER ADAPTER - MAGPUL
Price €22.00The Paraclip QD adapter adapts to push-button QD swivel sockets to allow the use of Paraclips and other clip sling accessories. Made of precision casting Melonite™ finished steel.
-
Magpul MOE Rail Section L2
Price €12.90Designed for use with MOE Hand Guards and Forends, the MOE Polymer Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc.
Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges.
All hardware necessary for attachment directly to integral mounting slots on MOE Hand Guards and Forends is included. Additional hardware may be necessary for other applications.
Size L2 (5 Slots), max overall length of 2.5". Mounting screw center-to-center of 1.2".
-
Magpul MOE Rail Section L3
Price €13.90Designed for use with MOE Hand Guards and Forends, the MOE Polymer Rail Sections allow the attachment of various 1913 Picatinny spec rail-mounted accessories such as lights, vertical grips, etc.
Injection molded from a proprietary reinforced composite for enhanced strength and durability while remaining lightweight, Rail Sections also feature beveled ends to reduce snagging and eliminate sharp corners and edges.
All hardware necessary for attachment directly to integral mounting slots on MOE Hand Guards and Forends is included. Additional hardware may be necessary for other applications.
Size L3 (7 Slots), max overall length of 3.3". Mounting screw center-to-center of 1.6".
-
-
Magpul AFG M-LOK Adapter Rail
Price €13.90 -