Lizard/Skin torso fabric extremely stretchy and abrasion resistant No-Melt/No-Drop

Knitted fabric of the torso reinforced with ceramic stitches. This results in exceptional protection against abrasion of the plate holders.

Lizard/Skin torso fabric is based on Lyocell/polyamide knitting

Exceptional breathability and extremely short drying time of the fabric (even wet).

At the hips of the Striker X Combat Shirt is breathable and breathable padding. 

The air/pac® pads are located at shoulder level. These 8mm thick inserts make it easy to carry a heavy plate holder or backpack on your shoulders.

Zippers along the upper part of your arms. 

The closure of the collar at 3 levels for adjustment

Inserts for elbows UF PRO Flex 

Closure of the collar with 3 levels with velcro.

Air/PAC® inserts at the shoulders.

2 pockets on the arm with velcro closure, pencil pocket with extra strap for easy opening.

Velcro at chest level to easily attach identification patches.

Special pockets for UF PRO elbow pads.

Padding at the hips.

Abrasion-resistant Lizard/Skin fabric for the torso.

Adjustable sleeve width.

Ergonomic sleeves, easy to roll up.

Extremely comfortable UF PRO® Striker XT Gen.2 combat shirt 

UF PRO® has combined different materials in the Striker XT combat jersey, which gives it robustness, comfort and quick-drying properties.

Sleeves made of strong and breathable Ripstop fabric

Abrasion-resistant knit torso area and armpit area made of merino-polyester anti-odor mixture. 

To protect the latter from abrasion, the outside of the fabric has been reinforced with a strong and comfortable braid.

Removable UF PRO® air/pac inserts (8mm) at shoulder level distribute the weight of loads, and optimize air circulation 

The sleeves consist of two upper pockets and two pockets under the arms. 

The pockets under the arms have an extra strap inside to secure small objects A MOLLE System applied to the top of the pocket, which allows any MOLLE-compatible pouch to be attached to it.

Ergonomic sleeves hold UF PRO® Flex elbow pads without strap fixation.

Integrated ventilation zippers on the back of the upper arm

Extra-long front zip.

Ventilation zips on the upper part of the arms.

air/pac® inserts at shoulder level.

Ergonomic sleeves, easy to roll up.

Abrasion-resistant and quick-drying knitwear in the torso area.

Merino/polyester anti-odor blend under the armpits, reinforced with a breathable nylon mesh.

2 x large pockets on the arm with velcro and extra strap for easy opening.

2x pockets under the arms with elastic straps on the inside and MOLLE on top for fastener

 collar lined in soft fabric.

Pockets for elbow pads UF PRO® Flex.

Comfortable and lightweight padding for your elbows

Uf Pro® flex pads are made for your activities requiring elbow cushioning.

As with all our protections, no external fixation is necessary. 

The inserts are available in thickness 6 mm. 

Inserts are compatible with most Uf Pro® jackets, shirts and polo shirts

Delivered in pairs

Excellent damping properties

Ability to form according to elbow geometry

Foam technology that, under the effect of high energy, hardens enough to absorb excess and dangerous energy. 

Although the inserts have a compact structure, they offer excellent comfort thanks to excellent deformability, as they constantly adapt to the geometry of the elbow. 

In addition, they are distinguished by a sensationally low weight, about half that of other comparable high-tech protections.

UF PRO® Combat Shirts and Combat Jackets are cut in such a way that Flex elbow pads provide reliable, effective and comfortable elbow protection at the same time.

The UF Pro® AcE Winter Combat Shirt has a structure that ensures an optimal temperature while protecting elements. 

The sleeves are equipped with a high-performance anti-cold lining in G-Loft. 

Integrated air/pac® shoulder and upper back pockets provide extra comfort and protection. 

The closing of the ventilation openings allows the air/PAC® pockets to trap the air and provide additional insulation.

37.5™ fiber technology to wick sweat away from the body, 37.5™ fiber technology is 800 times more effective at evaporating sweat.

The windproof and water-repellent outer layer

Angled front zipper prevents clothing zippers from overlapping

8 mm thick air/pac® fabric inserts form a cushion and thus help distribute the weight of personal ballistic protective equipment or heavy backpacks

Windproof, waterproof and breathable outer fabric.

High performance cold protection in the sleeves.

Excellent body sweat management thanks to the Merino/polyester 37.5™ material in the sleeves and the comfortable micro-fleece at the front and back.

openings on the wrist warmers to allow you to look at your watch.

Reinforcements in Cordura® at the elbows.

Adjustable neck width.

STRIKER X. COMBAT SHIRT, The best comfort in its class combined with extreme robustness.

Anti-fusion and anti-drip design. Reliable protection for elbows.

Air/PAC shoulder inserts

2 upper arm pockets with Velcro closure

Pen pocket and extra strap with easy opening

Velcro straps on the chest

Closure of the 3-level collar by Velcro

Closure of the 3-level collar by Velcro

Elbow Pad - UF PRO Zipper Pouches

Platelet at the hips

Abrasion-resistant Lizard/Skin torso material

Adjustable handle width

Ergonomic and easy-to-roll handles

The torso material is very stretchy, abrasion resistant and does not melt.

This same material guarantees extreme comfort and long-lasting performance, not to mention excellent drying speed.

The sleeves of the shirt are made of a ripstop fabric that does not melt or drip.

This gives the garment low weight, great aeration and quick drying.

The pelvic crest area of the Striker X battle shirt has a breathable pad 

and breathable.

Air/PAC® pads are placed at shoulder level.

With a thickness of 8 mm, these pads greatly facilitate the wearing of a heavy plate holder or a backpack.

Ventilation slides

The UF PRO Flex-Elbow pads fit perfectly into the pockets provided at the elbows.

The third generation of the Striker XT is even more powerful 

Extreme breathability, moisture wicking properties and robustness. 

New knit for the torso which, thanks to its lightness, gives the impression of being a second skin. 

dries extremely quickly and guarantees optimal comfort throughout the day. 

The Striker XT Gen.3 combat jersey is extremely breathable and wicks away moisture thanks to the 3D-Mesh fabric. 

The breathable, breathable hip padding prevents additional equipment on the hips from becoming a burden...

Two large pockets on the upper arms with zipper.

Long front zipper with merino neck padding.

Velcro flap with pen pocket.

Breathable and quick-drying torso material.

Breathable and breathable padding at the hips.

Inserts at the shoulders for efficient weight distribution.

Pockets for UF PRO Elbow padding

With the Mk.IV Field Shirt opt for the lightest and most versatile solutions and have combined them with the latest advances in textile engineering for optimal performance and versatility in battlefield conditions. The sleeve design was adopted from our Operator Combat Shirt and features an ergonomic articulated design for even more comfort and freedom of movement. As usual, we attach great importance to a high degree of freedom of movement, high functionality and a wide range of applications to improve the combat capability of the operator.

- Durable fabrics with excellent feel

- Lightweight design and construction

- Excellent wearing comfort and athletic fit

- Sleeves without zip

- Innovative pocket concept

- Location for rank badges

- Can be equipped with the Breacher Hood (optional)

- Internal compartments for elbow pads (optional)

Designed to be worn under body armor, this uncompromising quality combat shirt is ideal for combat situations. Its anatomical cut provides maximum comfort. The torso is composed of a flame retardant fabric that was developed specifically for military and police applications. Unlike polyester, this fabric will not melt or drip once exposed to high temperatures or flames. Its great ability to absorb and evacuate moisture combined with a soft surface to touch keep you dry and comfortable throughout your combat missions. Reinforced elbow areas can be equipped with removable elbows. The zipped collar is designed to be worn in different configurations to ensure your comfort and avoid dust intrusion. Seamless shoulder area prevents unwanted friction when wearing a backpack.

- Fire retardant FR treatment at torso

- Breathable, soft and comfortable

- Moisture removal and quick drying

- Very similar to cotton but very resistant

- Excellent wearing comfort and ultra-light

- Athletic Cup

- Asymmetric pocket

- Roll-up sleeves

- Reduction of NIR signature

See photo of size guide

The Carinthia Combat Shirt CCS is a technical first layer that has been developed with and by special units to guarantee the best possible performance under plate carriers. A G-Loft polyester veil was used at the shoulders to avoid unpleasant pressure points when using plate carriers. Thanks to its fast-drying functional fabric, the CCS ensures high comfort during heavy physical exertions.

Details:

Quick drying and breathability

High collar with &fraq14; front zipper, chin protection and velcro adaptation for Combat Hood

G-LOFT® polyester non-woven in collar and shoulders

Ripstop No Melt Outer Fabric - No Drip

4-way breathable stretch material in the torso area

Elbows and shoulders reinforced in Cordura

Pockets for elbow reinforcements

Sleeves with adjustable velcro closure

Elastic mesh material in forearms for better ventilation

Two spacious zippered pockets on the upper arms with velcro surface and elastic fastening inside

Weight approx. 490 g

Size code: S/CM2 Regular, M/CM3 Regular, L/CM4 Regular, XL/CM5 Regular, XXL/CM6 Regular

video

The Combat Shirt, specially designed by Carinthia to be used in combination with ballistic vests, has a functional fit that ensures great comfort. A G-Loft polyester veil has been used at the shoulders, which avoids unpleasant pressure points when wearing backpacks, plate holders and chest rigs. Thanks to its fast-drying functional fabric, the CCS ensures great wearing comfort during heavy physical exertions.

Details:

Quick drying and breathability

High collar with &fraq14; front zipper, chin protection and velcro adaptation for Combat Hood

G-LOFT® polyester non-woven in collar and shoulders

Ripstop No Melt Outer Fabric - No Drip

4-way breathable stretch material in the torso area

Elbows and shoulders reinforced in Cordura

Pockets for elbow reinforcements

Sleeves with adjustable velcro closure

Elastic mesh material in forearms for better ventilation

Two spacious zippered pockets on the upper arms with velcro surface and elastic fastening inside

Weight approx. 490 g

Size code: S/CM2 Regular, M/CM3 Regular, L/CM4 Regular, XL/CM5 Regular, XXL/CM6 Regular

Helikon MCDU Combat Shirt made from lightweight, breathable TopCool fabric and durable NYCO blend fabric.

Upper: 50% cotton, 50% nylon; Torso: 100% polyester

The torso part of Helikon's MCDU shirt is made of lightweight and highly breathable TopCool fabric, while the sleeves and stand-up collar are made of durable NYCO mixed fabric. The MCDU Combat Shirt has two arm pockets, Velcro ID surfaces and elbow reinforcements

Lightweight, breathable torso fabric.

Durable NYCO blend fabric.

1/4 zipper with chin protection.

Stand-up collar.

Pre-shaped sleeves with reinforcements.

Sleeve hem with Velcro closure.

2 zipped pockets on upper arms.

Velvet surfaces for ID patches.

Weight: approx. 400 g (size M).