Length-adjustable straps.

Length-adjustable elastic side fastener with side trigger buckle.

Suitable for SK4 dim panels. 30 x25 cm ideally. (can fit up to 33 x 27 cm)

Compatible with FL Chest Rig and Mag Pouches VL of the brand

2 elastic pockets

unisex

High quality ammunition combat vest, resistant and waterproof 

Modularity

- 3 x G36/AK double sleeves with Velcro/180° foldable

- 2 Multipurpose pockets

- All pockets can be opened/closed with Velcro/quick close

- 2 chest pockets for additional tactical equipment

- Compartment for cards with additional zipper

- Additional zipped compartment with pistol case for concealed transport

- Integrated compartment for a hydration system at the back of the vest

- Drinking tube holder

- MTS belt system and D-rings on the chest, back

- The vest is adjustable on both sides

Size: One size (fully adjustable)

Tactec plate holder universal size

For all types of uses, professional or sports type CrossFit

Padded shoulder straps with aerospace-grade breathable mesh

GrabDrag extendable, reinforced and discreet back handle 

Padded interior panels at the front and rear with large air intakes

Can hold 2 ballistic protection plates SAPI Medium or Large (25x30cm)

One-handed activation cable system to quickly offload the entire plate holder

Water-resistant coating

Many Soft passers-by on the whole

Wide band of passers Soft laser Cut self-gripping female, ideal for wearing your favorite patches (front/back)

This hanger is designed to carry 50 kg of clothing and equipment.

Usable in both directions, either thanks to its hook you can hang all your equipment, or thanks to its ergonomic handle, you can carry them comfortably

Designed in a military field, it is used to carry plate holders and various equipment, its use has spread in the field of scuba diving and hikers.

Height :25 cm

Width: 40 cm

Gen2 tactical hanger, for plate holder, diving equipment, backpack etc ...

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.

The Single Pistol Case is a padded bag for storing pistols and other valuable items. The bag has two large, comfortable transport handles. External MOLLE laser cut-outs for various accessories and an ID card pocket. Two Internal flat pockets for additional storage space. One inner pocket is made of velour for Velcro attachments.

Features:

- Designed to store a pistol or other valuables

- External ID Card pocket

- Two comfortable carry handles

- Made of 500D Nylon and bonded Laminate for extreme robustness

- Laser cut MOLLE

- Removable Padding to keep your content safe

- Inner flat pocket

- Elastic webbing loops for various accessories

Fabrics:

- 500D Nylon bonded with NBR fabric

- 500D Nylon

- YKK Zipper

- Nylon Webbing

FLOKI TIER1 includes:

Floki Box Pouch Coyote/Multicam

Tyra Strap Coyote/Multicam

Frey M4/AK Triple Pouch Coyote

The Floki Box pouch has been designed to offer the greatest flexibility to the specific needs of an operator, allowing it to be used in chest rig configuration or coupled to a HARALD carrier platform and, in any case, adapted to transport the equipment required for each mission.

Mesh MultiCam®

Nylon fabric 1000D

Tyra also includes elements such as a laser-cut MOLLE area that increases the carrying capacity on the back or, thanks to the laser-cut MOLLE lines on the shoulder straps themselves, better organizes the cables or hydration tubes.

ITW Nexus® GTSR Split-Bar Body clips with GhillitexTM technology designed for quick attachment to MOLLE/PALS systems from 1 to 25 mm

1000D Nylon Fabric - MultiCam® Mesh

Frey M4/AK versatile pouches, as they can be used as inserts or as conventional external pouches, and can be attached by Velcro or MOLLE to any equipment holder

High-performance stretch fabric

Nylon fabric 1000D

Female Velcro

The Plate Carrier QR LC ZP of the ZP series of Tasmanian Tiger is equipped with zippers at the back. A rescue/transport handle is also new.  

Compatible with TT interchangeable panels.

Façade and sides with MOLLE system for individual extension.

MOLLE system in laser cut version.

Pocket for integrated radio.

Velcro surface at front and back (buckles).

Interchangeable side panels for the use of pockets for ballistic side plates.

Adjustable straps from 28 cm min. to 52 cm max.

Semi-rigid elastic side fastening adjustable in length with MOLLE system in Lasercut version with 5 slots.

Vertical elastic rigid side mount 7.5 cm high.

Back zippers for fixing compatible panels and packs (ZP series), distance between them 25 cm, Vislon type, thickness #10, length 24 cm.

Zip panel included (MOLLE Panel ZP) with MOLLE system in lasercut version and predisposition for hydration system.

Universal size (adjustable lengths and widths).

Weight: approx. 1460 g.

The HARALD plate holder is part of the Valhalla system that allows compatibility of the equipment with other elements of this system or other brands

HARALD TIER0 includes:

Harald Plate Carrier Front Coyote/Multicam

Harald Plate Carrier Back Coyote/Multicam

Sigurd Cummerbands Coyote/Multicam

Multicam® mesh for immediate drainage during marine operations. Reduced weight and better evacuation of body heat.

ITW Nexus® GTSR Split-Bar Body GhillitexTM clips with acetal construction for quick attachment to MOLLE systems from 1 to 25 mm.

GhillieTEX TM gives a lower IR mark to MILSPEC products that are 100% Berry Amendment compliant.

Nylon fabric 1000D - MOLLE laser cut - soft velcro

Communication elastics to maintain PTT, attachment of hydration tubes, antennas and communication cables.

Top internal pocket for documentation.

Original YKK zipper.

Silent zipper with heat-sealed paracord 

Compatible with SAPI M style plates

Adjustable Velcro shoulder straps 

Clips concealed under soft straps to prevent accidental opening

Side bands in elastic fabric 

Quick access handle to the plate compartment