GORE-TEX® 3 layers throughout the lining

The Black Eagle Athletic 2.0 V GTX mid is both waterproof and extremely breathable.

Anti-slip and all-terrain grip

Sole made from a special rubber mixture and an innovative structure of the contact sole.

Robust and durable thanks to bross2 suede

Extremely sturdy, durable and resistant exterior material that can also be cleaned quickly and easily.

Cushioning with HAIX absorption 

Comfortable wearing - Damping wedge integrated inside effectively cushions every step.

Non-magnetic for security gates

The Black Eagle Athletic 2.0 V GTX Mid is completely metal-free and is therefore ideal for activity in a safe zone.

Special strips to optimize ergonomics

Shoes Police Gendarmerie and Security

Permeable to water vapour and evacuates moisture to the outside. This is ensured by the use of finely worked microfiber fabric.

Waterproof and extremely breathable. This is ensured by the three-layer GORE-TEX membrane throughout the lining of the Black Eagle Athletic 2.1 GTX® Mid.

Special rubber compound and innovative tread structure provides extremely high slip resistance and grip on a wide range of surfaces.

Damping wedge integrated inside cushions your steps

Free of metal and is therefore ideal for your work in safe zones

Certification for orthopaedic insoles

GORE-TEX®

Metal-free

Relieve depreciation

Particularly non-slip

According to the certificate: CE EN ISO 20347:2012 O2 HRO HI CI WR FO SRC

Color: Black

Height in cm: 15.0 cm

Top material: Microfiber / textile

Safety class: O2

Classic lacing

Goretex raincoat

Weight per shoe:535g

All-terrain Nubuck shoe for your treks and hikes

Waterproof and extremely breathable. This is ensured by the three-layer GORE-TEX® membrane throughout the lining

Special rubber compound and innovative tread structure provides extremely high slip resistance and grip on a wide range of surfaces

The built-in damping wedge inside cushions steps.

Special foam system ensures that air circulates in the shoe and moisture can escape

free of metal and is therefore ideal for your work in safe zones

Certification for orthopaedic insoles

GORE-TEX®

Climate System

Relieve depreciation

Particularly non-slip

According to the certificate: CE EN ISO 20347:2012 O2 HRO HI CI WR FO SRC

Color: brown

Height in cm:15.0 cm

Top material: Leather/textile combination

Safety class:O2

Closing: Quick Closing

Watertight: GORE-TEX® waterproof

Weight per shoe:600g

Leather thickness:2.0 - 2.2

Chemical-resistant gas-free waterproofing spray that protects leather and textiles from water, dirt, oil and grease.

Advice for use:

Clean the shoes first with a brush or remove stubborn dirt with a light, lukewarm soap solution before re-impregnating it. 

Apply the spray generously to the leather at a distance of about 30 cm so that the shoe "absorbs" the impregnating product so that the care substances can penetrate the leather. 

Let the spray act for about 15 minutes before starting the next treatment; This treatment can be repeated up to 3 times. Additional maintenance of the smooth leather can be applied afterwards.

Treat every four to eight weeks. You should also re-impregnate them if the shoes are really wet.

Let your shoes sit for about 24 hours after impregnation so that the care substances can take effect.

High quality foam mat for custom orthopedic insoles

HAIX® insoles comply with DGUV 112-191 (BGR 191) regulations on accident prevention and health and the application of ÖN-Z195-2012.

The HAIX CO system consists of a durable green foam sole with a resistant coating in the design of the HIX®® Logo. Pre-cut foam can be used for sizes up to EU 51/UK 15.

100% polyester fabric promotes moisture dispersion. 

Fine-pore PU foam for high moisture absorption and excellent cushioning over the entire sole.

> The orthopaedic surgeon can choose between two different EVA hardnesses and thus take into account your individual needs:

1. EVA blank approx. 40° Shore A: for safety footwear and work footwear subjected to reduced loads

2. EVA blank approx. 50° Shore A: for safety footwear and work shoes under heavy loads (e.g. firefighter with equipment)

The selected EVA material is suitable for all manufacturing processes since the orthopedist only has to observe the hardness characteristics.

Cost savings of around 60% for prescribed components: expensive use of secure ESD materials (e.g. EVA / glues) IS NOT necessary taking into account the attached note about the conductive belt, so that we can manufacture your insoles at the most favorable price possible.

kit:

1. A premium foam mat suitable for sizes UK 3 – UK 15 / EU 35 – EU 51.

2. Leaflet for the individual manufacture of orthopaedic insoles using the HAIX® CO system.