Minimalist, discreet and lightweight pocket

Contains 1 PA type charger

Double retention system with a discreet insert and a wide elastic band that compresses the pocket

No flap or bungee system is required to secure the charger

The concealed insert holds the top of the pocket open to allow easy insertion/extraction

Soft 1/2" Flex-HT™ on the back for more weaving possibilities (pocket height adjustment or belt fastening)

Flex-HT™ 3/4" soft fastener in soft TPU for easier weaving

Pull to quickly release Flex-HT™ soft fastening straps

2 Flex Hook adapters included 

Drainage port at the bottom of the pocket

Double pocket for 2 chargers

Suitable for PA chargers or equivalent

FLEX-HT™ mounting system

Installs on any MOLLE or Hexgrid® platform

Short pocket height with internal PC compression

Strap reinforcement for abrasion and durability

Drainage hole

Minimalist, discreet and lightweight pocket

Contains only 1 AR/M4 charger

Double retention system with a discreet insert and a wide elastic band that compresses the pocket

No flap or bungee system is required to secure the charger

Concealed insert keeps the top of the pocket open for easy insertion/extraction

Soft 1/2" Flex-HT™ pass on the back for more weaving possibilities (height adjustment of the pocket or belt fixation)

Soft Flex-HT™ 3/4" fastener in soft TPU for easier weave

Pull-pull to quickly release Flex-HT™ soft fastening straps

2 Flex Hook adapters included

Drainage port at the bottom of the pocket

water resistant

Minimalist, discreet and lightweight Admin pocket

Laser-cut horizontal soft platform

Zipped main compartment with shockproof cord for an adjustable opening degree up to 180°

3 internal pockets with holding elastics to secure accessories

1/2" Flex-HT™ soft loops on the back for more weaving possibilities (height adjustment of the pocket or belt attachment)

Soft Flex-HT™ 3/4" fastener in soft TPU for easier weave

Pulls to quickly release Flex-HT™ soft fastening straps

2 Flex Hook adapters included 

Drainage port at the bottom of the pocket

water resistant

Minimalist, discreet and lightweight pocket

Contains 2 AR/M4 type chargers

Double retention system with a discreet insert and a wide elastic band that compresses the pocket

No flap or bungee system is required to secure the charger

Concealed insert holds the top of the pocket open for easy insertion/extraction

Soft 1/2" Flex-HT™ pass on the back for more weaving possibilities (height adjustment of the pocket or belt fixation)

Soft Flex-HT™ 3/4" fastener in soft TPU for easier weave

Pull-pull to quickly release Flex-HT™ soft fastening straps

2 Flex Hook adapters included 

Drainage port at the bottom of the pocket

water resistant

The Drop Flex tote bag is multifunctional

Load shedding your chargers

Container of cases on the launch pads

Medical container type used dressings, cotton, gloves

Canine container and safety

Container for all your sports or outdoor practices (excavations, gemologies, etc.)

zippered pocket to reduce volume when not in use; Release there when necessary. 

Top of the pocket stiffened to keep a convenient opening. 

Thanks to the Flex-Hook adapters, you can adapt this pocket on MOLLE or hook-and-loop.

Universal Polymer Charger Holder with Chop-lock System 

Compatible with wide range of 9mm double column chargers 

Suitable: Glock, Sig Sauer P226/P229, SW MP9, Beretta M9, Taurus 92/99, CZ 75 compact, large power K100, Walther P99 etc.

The UBC-02 quick attachment system allows it to be installed on the belt or soft vest without having to unclip it.

The gap between the material transported is much less important with this clip system.

Case can rotate 360 degrees with 16 stop positions

The Claw Gear in laminated nylon offers absolute versatility and durability with a flat profile and weight. The Tacticoat materials used are extremely robust, abrasion resistant, lightweight and NIR-treated in accordance with military requirements.

The Claw Gear Universal Rifle Mag Pouch is suitable for all common rifle magazines. The tensile strength of the closure is regulated by an elastic cord.

Suitable for all common rifle magazines, such as NATO STANAG 4179, AR-15/M4/M16 including PMAGs, AK 74/ AK 47, SIG 55x, G36, Galil 5.56mm, Steyr AUG.

Details:

Robust Tacticoat Lasercut laminate construction.

Light and flat.

Bungee-Cord compression.

MOLLE/ PALS mounting system.

Crye Precision™ MultiCam®.

Weight: about 82 g

The Claw Gear in laminated nylon offers absolute versatility and durability with a flat profile and weight. The Tacticoat materials used are extremely robust, abrasion resistant, lightweight and NIR-treated in accordance with military requirements.

The Claw Gear Universal Rifle Mag Pouch is suitable for all common rifle magazines. The tensile strength of the closure is regulated by an elastic cord.

Suitable for all common rifle magazines, such as NATO STANAG 4179, AR-15/M4/M16 including PMAGs, AK 74/ AK 47, SIG 55x, G36, Galil 5.56mm, Steyr AUG.

Details:

Robust Tacticoat Lasercut laminate construction.

Light and flat.

Bungee-Cord compression.

MOLLE/ PALS mounting system.

Weight: approx. 82 g