- Universal bag suitable for hand luggage

- Covered compression straps

- 2 large compartments with mesh pocket dividers

- Optional backpack transport system

- Length adjustable shoulder strap with shoulder padding

- Main compartment with lockable zipper

- Clamshell design

- Clean civilian exterior – solid handles

- Sturdy zipper #10 

- Fixed and freely adjustable attachment for different types of weapons

- Several rows of Velcro M.O.L.L.E. inside

 - Elastic equipment buckles additional pockets and large velcro area

Large luggage with wheels, sturdy and water resistant

False bottom zipped allowing the storage of a long weapon type AR

Castors tested up to 68 Kg load (replaceable)

Main compartment: 101.6 x 52 x 41.2 cm

5 outer zipped pockets

2 flat pockets for documents

Removable buckle strap for pairing other luggage

Write-bar™ writable tape, name tag, badge holder and document pockets

water resistant

Impact-resistant PE panels

YKK® lock-compatible closures

Pads, axles and corners in reinforced polymer

Reinforced background

Padded pockets for your protection and that of your equipment.

Side pockets that can hold items of small or medium size.

Front main panel with charger pockets and internal compartments. 

The tote for ammunition and the removable casing bag allow you to take only the bare necessities.

The front wall can be opened and lowered to provide a convenient workspace.

Total volume: 43 liters

Main compartment: 24 x 44.5 x 26.6 cm

Front pockets: 21.5 x 19 x 6 cm

Back pocket: 21.5 x 39 x 6 cm

Left side pocket: 21.5 x 12.7 x 5.7 cm

Right side pocket: 20 x 19 x 6 cm

Bottle pocket: 14 x 7.6 x 5.7 cm

Removable bag: 18.4 x 40 x 14.36 cm

The Hydration Carrier Core 2L is an insulated hydration bag that holds up to 2 L of container. 

The MOLLE external straps allow mounting of various pouches and accessories. Inside a loop keeps the bladder in place, so that it does not slide down when it empties.

Height: 25cm

Width: 20cm

Depth: 2cm

The Hydration Carrier Core 2L is an insulated hydration bag that holds up to 2 L of container. 

The MOLLE external straps allow mounting of various pouches and accessories. Inside a loop keeps the bladder in place, so that it does not slide down when it empties.

Height: 36 cm

Width: 20 cm

Depth: 2 cm

Clawgear’s nylon equipment is designed to increase the operator's performance. These products are optimized to be as versatile and lightweight as possible. The use of bonded Reinforced materials same time massively increases the durability and lifetime maintaining a low weight.

The Single Pistol Case is a padded bag for storing pistols and other valuable items. The bag has two large, comfortable transport handles. External MOLLE laser cut-outs for various accessories and an ID card pocket. Two Internal flat pockets for additional storage space. One inner pocket is made of velour for Velcro attachments.

Features:

- Designed to store a pistol or other valuables

- External ID Card pocket

- Two comfortable carry handles

- Made of 500D Nylon and bonded Laminate for extreme robustness

- Laser cut MOLLE

- Removable Padding to keep your content safe

- Inner flat pocket

- Elastic webbing loops for various accessories 

Fabrics:

- 500D Nylon bonded with NBR fabric

- 500D Nylon

- YKK Zipper

- Nylon Webbing

The Nite Ize RunOff waterproof storage bag with TRU® Zip technology protects its contents from water and dirt. The storage bag saves space by also acting as a compression bag and compressing bulky items such as down jackets, blankets and clothing. The sturdy reinforced nylon handle and integrated anchor points allow for comfortable attachment, while the translucent front panel makes it easy to spot objects inside.

RunOff waterproof storage bag is fully waterproof 

Nite Ize’s unique patented TRU® waterproof zipper sets RunOff bags apart from all other bags available on the market. The simple zipper is easy to use and has a waterproof and dustproof seal that is flawless and creates a secure closure. The toothless design is quiet, glides without friction and offers maximum reliability.

Tested dustproof and waterproof to IP67 (resists immersion in water up to 1 m deep up to 30 min).

Durable TPU construction with HF welds for ultimate reliability.

With patented TRU® waterproof zipper.

Compresses bulky objects to save space.

Integrated anchor points for a versatile attachment.

The translucent front allows you to easily find objects.

Silent TRU zipper technology.

Dimensions: approx. 176 x 262 x 82mm.

Weight: approx. 85 g.

Wherever you are, you’ll enjoy the endless possibilities of using the Nite Ize GearTie: Untangle and bundle computer cables, cables from small and large electrical devices, headphones, hoses and mats in a single turn with the GearTie. GearTie is composed of a fully flexible wire inside and a soft but robust rubber outside, which guarantees an absolute hold without damaging objects

Details:

The solid wire always retains its shape.

Does not cause scratches or pressure points.

Reusable to infinity.

Scope of delivery: 4 pieces.

Length: 7.5 cm.

Weight: approx. 1 g/piece.

The Nite Ize DoohicKey ClipKey is the perfect mini-multi-tool, the mini term referring only to size and not functions. The tool includes a carabiner, bottle opener, serrated blade (for opening packages or cutting string) and a flat head screwdriver. Ideal, for example, for keychain or backpack.

Dimensions: 68 x 25 x 6.5 mm.

Weight: 12 g.

The Nite Ize S-Biners® are extremely versatile double-opening stainless steel wire carabiners. The two openings allow an infinite number of applications. The high tensile strength ensures cohesion even in high loads. Set of S-Biners with three sizes:

Size #2:

Dimensions: 50 x 22 x 6 mm.

Weight: 7 g.

Pulling force: about 4.5 kg.

Size #3:

Dimensions: 68 x 30 x 7 mm.

Weight: 14 g.

Pulling force: approx. 11 kg.

Size #4:

Dimensions: 89 x 40 x 8 mm.

Weight: 30 g.

Pulling force: 34 kg.

Nite Ize carabiner with SlideLock® lock. The SlideLock® lock provides protection against inadvertent opening. The high tensile strength ensures cohesion even under heavy loads.

Size #2 (S):

Dimensions: 28 x 44 x 8.5 mm.

Weight: 7 g.

Pulling force: about 4.5 kg.

Size #3 (M):

Dimensions: 38 x 59 x 10 mm.

Weight: 14 g.

Pulling force: 11 kg.

Size #4 (L):

Dimensions: 50 x 78 x 11 mm.

Weight: 29 g.

Pulling force: 34 kg.

Size #6 (XL):

Dimensions: 75 x 117 x 15 mm.

Weight: 84 g.

Pulling force: 45 kg.

The Nite Ize SlapLit is made of durable nylon, features a reflective spider web pattern and is powered by a bright, easy-to-activate LED that illuminates the entire strip. Simply screw it, run it around the wrist, arm or ankle and be immediately visible at night. The SlapLit is lightweight and robust. The SlapLit can be straightened and laid flat with a simple rotation of the thumb or suspended in its straight shape as an LED marking signal.

Details:

Fine design and without fittings.

lED bright red for active lighting in continuous or flashing mode.

Highly reflective pattern for better passive visibility.

Lithium battery 1 x 2032 3V easy to replace (included).

Battery life: 100 hours.

Dimensions: 349 x 34 x 8 mm.

Weight: 34 g.

The Nite Ize TagLit LED magnetic marker is a quick solution for anyone who wants to be visible in the blink of an eye at night or dusk. This reflective marker with four bright LEDs magnetically attaches to clothing, backpacks and vests and makes the wearer immediately visible during all night activities. The powerful neodymium magnet keeps the marker securely in place, LEDs can be activated in continuous lighting or flash mode. Powered by a replaceable 2032 battery, this weatherproof marker has a battery life of more than 70 hours.

Details:

4 bright LEDs.

2 operating modes, permanent lighting and flash.

Powerful neodymium magnets for easy and secure attachment.

Seamless durable nylon design.

Structure for passive reflectivity.

Weather resistant.

Replaceable 2032 lithium battery included.

Battery life: 70 hours.

Dimensions: 120 x 40 x 7 mm.

Weight: 14 g.

Wherever you are, you’ll enjoy the endless possibilities of using the Nite Ize GearTie: Untangle and bundle computer cables, cables from small and large electrical devices, headphones, hoses and mats in a single turn with the GearTie. GearTie is composed of a fully flexible wire inside and a soft but robust rubber outside, which guarantees an absolute hold without damaging objects

Details:

The solid wire always retains its shape.

Does not cause scratches or pressure points.

Reusable to infinity.

Scope of delivery: 2 pieces.

Length: 45.7 cm.

Weight: approx. 10 g/piece.

With a capacity of 80 liters, the Tasmanian Tiger Gear Bag offers enough storage space to be the right choice of equipment bag for almost all types of interventions. Padded shoulder straps and additional straps provide sufficient support when carrying the Gear Bag.

Tasmanian Tiger Gear Bag 80 L details:

Gear Bag with spacious and solid main compartment.

Two laser cut MOLLE panels with velcro inside.

Two pockets in mesh.

Additional transport strips on the sides.

Velcro surfaces for patches and badge pocket.

Dimensions: 50 x 45 x 35 cm.

With a capacity of 100 liters, the Tasmanian Tiger Gear Bag offers more than enough storage space to be the right choice of equipment bag for all types of interventions. Padded shoulder straps and additional straps provide sufficient support when carrying the Gear Bag. Even with heavy and bulky equipment, this carrying bag remains easy to handle.

Tasmanian Tiger Gear Bag 100 L details:

Gear Bag with spacious and stable main compartment.

Two laser cut MOLLE panels with velcro inside.

Two pockets in mesh.

Additional transport strips on the sides.

Velcro surfaces for patches and badge pocket.

Dimensions: 90 x 35 x 30 cm.

From the Gear Bags series, the Tasmanian Tiger Gear Bag 40 L is now available as a bundle for Christmas. This Gear Bag set consists of the Tasmanian Tiger Gear Bag in limited edition, the new annual calendar with photos of Tom Weber, a limited edition patch and an exclusive hobo stove.

Tasmanian Tiger Gear Bag details:

Bundle with Gear Bag, Calendar, Patch and Hobo.

Gear Bag with spacious and solid main compartment.

Two laser cut MOLLE panels with velcro inside.

Two pockets in mesh.

Additional transport strips on the sides.

Velcro surfaces for patches and badge pocket.

Dimensions: 45 x 25 x 35 cm.

Tasmanian Tiger Evidence Bag L, a bag with multiple possibilities, the Evidence bag was designed primarily for the collection of evidence, but thanks to its quick-drying mesh fabric and good air circulation, this bag can also be used for sports, leisure and outdoor activities. The bag is equipped with a handle, a strap and a transparent pouch for labeling.

Details:

Shoulder strap removable and adjustable in length.

Sturdy handle.

Velcro surface on the front (velvet).

Transparent pocket for marking.

Volume: 70 liters.

Dimensions: 70 35 21 cm.

Weight: 540 g.

Fully padded shoulder bag. The interior of the Tasmanian Tiger Modular Equipment Case is covered with a large surface of MOLLE Velcro and is equipped with padded partitions that can be used flexibly. The separate laptop compartment with adjustable width can also be used as a weapon compartment. The flap is secured with velcro and quick closures. An additional zipper allows quick access from the top.

Removable and rubberized shoulder padding on the underside

Adjustable shoulder strap with shoulder padding

Strong and reinforced handle

Flap secured by velcro and quick closures

Mesh pocket inside the lid

Front zip pocket

Padded all over the perimeter

Partitions that can be used flexibly

DeepL Access from the top

Large surface of velcro MOLLE inside

MOLLE system for attaching cases, charger bags, etc. under the lid

Laptop compartment suitable for a 12-inch laptop, adjustable in width, usable as a weapon compartment

Shorter separations to use the bag as a bag for weapons included

Dimensions: 39 x 25 x 15 cm.

Volume: about 15 liters.

Weight: approx. 1250 g.

The Tasmanian Tiger Focus ML Camera Bag is a functional carrying bag for ML cameras or small DSLRs. The interior distribution can be individually adapted to the size of the camera. The accessories fit in one of the two inner pockets or in the lid compartment. The bag can be worn on the shoulder or directly to the belt.

Details:

Removable and adjustable shoulder strap

Removable belt with quick closure.

Side carrying handle.

Flat pocket inside the zip cover

Padded main compartment all around with two-way zipper.

Two pockets for accessories inside.

Two separations can be used flexibly with velcro.

Possibility of fixing directly to the belt thanks to a loop at the back.

MOLLE reverse fastening system in hypalon.

Laser cut MOLLE system on front and sides.

Integrated rain cover

Velvet surface for identification patches.

Dimensions: approx. 23 x 20 x 12 cm.

Weight: approx. 495 g.

Padded bag for medium-sized telephoto lenses. Thanks to the flexible movement bellows on the front of the bag, the handle can stay on the lens

With velcro and length adjustment for different lens lengths and a MOLLE system at the back.

Details:

Velcro and length adjustment for lenses of different lengths

Conical and padded main compartment with zipper

Can also be used for a 50 mm belt

Suitable for medium-sized telephoto lenses up to 100 mm in diameter and 245 mm in length

Flexible housing for tripod clamps (can remain on the lens)

MOLLE system on the back

Dimensions: approx. 24 x 11.5 x 12 cm.

Weight: approx. 180 g.

The TT Officers Bag is a universal equipment bag with a capacity of 58 liters. In addition to the main compartment, the TT Officers Bag has a side pocket on each front side. One of them has a double zipper to accommodate an IFAK pocket for DeepL access, the other is equipped with MOLLE Velcro. The front side of the main compartment is also equipped with MOLLE Velcro. The main compartment of the bag has lockable zippers. The carrying handles can be stowed away and the bag can, if necessary, be equipped with padded shoulder straps for backpack. These are stored in the lid in a zippered pocket.

Ergonomic and padded shoulder straps.

Chest strap adjustable in height.

Removable shoulder carrying system, the shoulder straps store in the lid.

Side carrying handles.

The carrying handles can be stored in the side pockets.

Strong and reinforced handles on short sides.

D-ring for optional strap attachment (shoulder strap not included).

Main compartment with wide opening for easy storage and lockable zippers.

Main compartment with 3 zippered mesh pockets, 2 hand pockets and a MOLLE velcro for modular extensions.

Two zippered pockets on the long sides.

A side pocket with IFAK Pouch (size: 23 x 33 x 5 cm, volume: 6 L).

A side pocket with velcro MOLLE for modular extensions.

A flat zipper pocket on the lid.

Zip opening aids, easy to grip even with gloves.

Velcro surface on the front (velvet).

Volume: 58 litres 

Dimensions: approx. 57 x 34 x 27 cm.

Weight: approx. 1580 g.

Modular training bag for shooters. The TT Modular Range Bag has an adjustable, detachable Velcro inner compartment and detachable inner pockets for the charger and accessories. A large outside pocket is equipped with Molle-Klett and other storage possibilities. In addition, three other outer pockets and a pocket on the lid are available. The main compartments of the bag are equipped with lockable zip sliders.

Shoulder strap removable and adjustable in length.

Reinforced handles.

Lockable zipper sliders (padlocks not included).

Padded all over the perimeter.

1 flat zippered pocket at the top for documents or others.

1 external zippered pocket with 1 MOLLE Velcro laser cut panel.

1 external zipped pocket with 3 panels Lasercut MOLLE, key chain and 1 zipped mesh pocket.

1 large main compartment with modular interior compartment detachable by velcro.

Includes 6 magazine holders with velcro and rubber buckles in 3 different sizes.

Velcro MOLLE inside for modular extensions.

MOLLE laser cut system.

Velcro surfaces for identification patches.

Includes 1 large accessory pocket: 24 x 16 x 15 cm, 90 g.

1 flat accessory pocket included: 19 x 16 x 3 cm, 55 g.

Includes 2 TT Tac Pouch Round VL accessory round pockets: Ø8 x 2.5 cm, 25 g each.

Including 2 velcro cases TT Internal Holster VL.

Dimensions: approx. 31 x 44 x 23 cm .

Volume: 36  + 10 litres     

Weight: approx. 2150 g

Spacious shoulder bag for laptop, filing cabinets and documents. The main compartment of the TT Document Bag is equipped with MOLLE Velcro, the built-in laptop compartment, suitable for a 15.4" laptop, can be detached. The front of the bag has laser cut MOLLE.

Details:

Padded and removable shoulder strap.

Sturdy carrying handle.

Locking zipper sliders.

Trolley mount on the back.

1 front compartment with elaborate organizer.

1 laptop sleeve padded and removable.

2 large compartments for filing cabinets.

1 laptop compartment suitable for 15.4".

Front and sides with laser cut MOLLE system for individual extension.

Velcro surface for identification badges.

Volume: 18 liters.

Dimensions: approx. 30 x 41 x 17 cm.

Weight: approx. 1100 g    

Large banana bag for universal use. The TT Modular Hip Bag 2 has a main compartment with MOLLE Velcro, a front pocket and an additional zippered compartment at the back. On the lid is a laser cut MOLLE band. The belt has a safety buckle to prevent unintentional opening. The belt can be removed to hang the bag from an equipment belt using hooks prepared for this purpose.

Details:

Belt adjustable in length and removable.

Large main compartment with elastic loops and MOLLE Velcro.

Velcro pocket and zippered compartment on the front.

Back pocket with zip.

Suitable for small SAPI side plates.

Velcro MOLLE inside for modular extensions.

Laser cut MOLLE system on the lid.

The hip pocket can be hooked to the MOLLE system without belt using hooks.

Zipper opening aids, easy to grip even with gloves.

Volume: 5 liters.

Dimensions: approx. 35 x 16 x 6 cm.

Weight: approx. 245 g.

Organizer with integrated card pouch, pen compartments, utensils pockets, writable card pouch with plastic pens, water and dirt resistant

Dimensions approx. 20 x 15.5 x 3 cm.

Full weight approx. 250 g

The Tasmanian Tiger Mil Transporter is partially padded and equipped with four removable interior pockets in different sizes for clear equipment storage. It also has a side compartment for firearms, in which long weapons up to 95 cm can be carried suspended. The optimized aluminum frame ensures a very good axis guidance, in combination with large wheels with a slight damping, the intervention trolley is easy to handle.

Robust outer material in CORDURA® 700 den.

Large front opening with lockable zipper No.10 YKK®.

Upper compartment with internal zippered mesh pockets.

Partially padded main compartment with Velcro divider, 2 mesh pockets and Velcro surfaces.

4 removable zip pockets with handles.

Padded side pocket for weapons with No.10 YKK® lockable zipper, MOLLE buckles and 4 attachment straps.

Bag head pocket with pockets for inserting items and No.10 YKK® lockable zipper.

2 wide compression straps with snap-in closures.

3 solid handles.

Removable aluminum frame for higher load use.

Robust and interchangeable castors.

Transparent compartment A5 for documents on the lid.

Large velcro surfaces on lid and head for identification patches.

Side stabilizers made of fiberglass.

Volume: 200 liters.

Dimensions:  95 x 40x 40 cm.

Weight: approx. 6450 g.

The 155-litre Tasmanian Tiger Transporter Heavy Frame MKII features an improved padded handle, larger wheels, a larger transparent document compartment and interior Velcro surfaces for increased modularity. The optimized aluminium frame ensures very good shaft guidance and, in combination with large wheels with slight damping, the service trolley is easy to handle.

Robust outer material in CORDURA® 700 den.

Large front opening with lockable zipper No.10 YKK®.

Main compartment with inner pockets, mesh pockets and velcro surfaces.

Flat side zip pocket with applied MOLLE buckles.

Zipped compartment at the head with MOLLE buckles applied.

2 compression straps with zippers.

Large padded carrying handles.

3 solid handles.

Removable aluminum frame for higher load use.

Robust and interchangeable castors.

Transparent compartment A5 for documents on the lid.

Volume: 155 liters.

Dimensions:  95 x 40 x 40 cm.

Weight: approx. 5150 g.

The Tac Case is a functional shoulder bag with a civilian look, also suitable for security forces. A product from the "civil" range of Tasmanian Tiger. Under the lid is a hidden MOLLE bar for equipment. It is also equipped with a removable organizer pocket.

Details:

Removable shoulders, rubberized on the bottom.

Removable and adjustable shoulder strap with shoulder padding.

Solid and reinforced handle.

Zip pocket on the back.

Flap secured by velcro and quick closures.

Padded 15.4 laptop compartment.

Key ring for the keys.

Pocket on the side.

Front zipped compartment with organizer.

Removable organizer.

Padding all over the perimeter.

Large space MOLLE velcro inside.

MOLLE system for attaching a holster, charger pocket, etc. under the lid.

Dimensions: 43 x 29 x 16 cm.

Volume: about 15 liters.

Weight: approx. 1230 g.

Large volume 110 litre service bag with telescopic aluminium handle and easy-to-handle wheels for easy and effortless transport. Fleece loops on the sides allow individual extension of the carrying bag.

Details:

Removable shoulder carry system, the shoulder straps store in the side pocket.

Removable carrying handles and compression straps.

Patch pocket for quickly accessible equipment.

Wide pocket opening for easy storage.

Mesh pocket in the lid.

Eight side pockets

A5 Name Label

Soft system on the outside.

Dimensions: 78 x 40 x 35 cm

Volume: 110 litres,

Weight: 5200 g

Material: 100% polyamide (Cordura 700 DEN).

In the fully open main compartment, six pockets of different sizes, with transparent lids, provide enough storage space. In addition, two of the pockets can be removed. In addition, the main compartment of the backpack has a large MOLLE Velcro surface, which makes it possible to supplement it individually. In the bottom compartment is a reversible rain cover and a Tac marker. In addition, the two flat zippered compartments on the front of the Survival Pack provide additional storage space for utensils and documents. Thanks to the daisy chain on the front, other pockets can be added on the front. 

-   Padded back

-   Two straps that can be stored in the backpack

-   Carry handles can be stored in side pockets

-   Height adjustable chest strap

-   Velcro surface on front (velvet)

-   Two front zippered compartments

-   Interior distribution with various different mounting options

-   Reversible rain cover integrated with marking system in the bottom compartment

-   Two removable and scratchable interior pockets (4 l and 2.5 l) with transparent lid

-   Four fixed inner pockets (1x 6 l, 1x 2.5 l, 2x 0.5 l) with clear lid

-   Separate compartment for use of hydration system

-   Integrated visual marking

-   Large MOLLE velcro surface inside

-   Two hooks to attach additional pockets or panels to the front

Volume: 16 liters.

Dimensions: approx. 45 x 26 x 13 cm.

The main compartment of the Tasmanian Tiger Modular Tac Pack 28 IRR has a flat zip pocket on the front - for small rooms or documents that are quickly accessible. The front of the Tasmanian Tiger Modular Tac Pack 28 opens completely thanks to the zipper that surrounds it, for a better overview and a better organization. Inside the front are 3 flat mesh pockets with zipper, and four mesh pockets on the inner sides of the backpack (2 on each side) + a velcro surface M.O.L.L.E . The laser-cut M.O.L.L.E surfaces on the sides and front of the Modular Tac Pack 28 can perfectly be used to attach other accessory pockets. The two vertical compression straps on the front are removable and serve to adjust the volume. The Tasmanian Tiger Modular Tac Pack 28 IRR comes with a removable belt in simple strap, but you have the possibility to equip your backpack with a Hip Belt to improve the wearing comfort, This transforms the Tasmanian Tiger Modular Tac Pack 28 into a backpack for heavy loads. The Bungee Cord provided by Tasmanian Tiger gives you the opportunity to easily and quickly store hiking poles, tripods or your rain jacket on your backpack. At the bottom of the Tasmanian Tiger Modular Tac Pack 28 IRR, you have the possibility to attach two compression straps (included in the delivery) for other equipment such as a tarp, a floor mattress.

The Base Pack 52 offers a volume of 52 liters and can be extended to 65 liters by adjusting the lid. The lid is also removable, so the backpack closes only with the Rolltop snow skirt

The belly belt can be removed and used separately as the Warrior Belt.

Tasmanian Tiger Tac Pouch 15 BSP Set side/gusseted pockets are ideal as a modular complement to the TT Base Pack 52.

Details:

V2 Plus Port System

Main compartment and lower compartment

Stick Holder/Ice Pins

Expandable volume from 52 l to 65 l thanks to the Rolltop snow skirt

Rolltop snow skirt (without lid) usable in two closing positions

Chest strap adjustable in height

Padded and removable hip belt

Lateral compression straps

Compression of the bottom all around

Lid with buckles for material

Easy to use lid compartment

Removable and height adjustable lid

Preparation for hydration system

Hardware carrier

Antenna passages on the main compartment

Separately usable hip belt as Warrior Belt

MOLLE system on all important mounting surfaces

Volume: 52 liters.

Dimensions: approx. 74 x 31 x 21 cm.

Weight: approx. 2670 g.

The Tasmanian Tiger Multipurpose Equipment Insert has a zippable front cover and top access, for example for the camera. In addition to flexible partitions, it has internal pockets in transparent mesh and an organizer.

Velcro strips on the outer side allow it to be precisely fixed on modular Velcro surfaces

The buckles on the top edge allow the insert to be attached with the TT SR 256 Safety QA buckles to all MOLLE panels or to the TT Modular Front Seat Panel.

Case Details:

Handle

Zip pocket on the front

Removable and padded front cover

Main compartment with lockable zipper

Second external aperture for a camera on top

Internal mesh pockets in transparent textile

Small organizer

Padded all over the perimeter

Partitions that can be used flexibly

Suitable for TT Modular Pack 45

Velcro adapter for fixing to modular surfaces Velcro

MOLLE velcro surface on the front

Dimensions: 40 x 31 x 15 cm

Weight: approx. 1260 g.

The universal Modular Pack 30 opens completely forward and thus offers free access to the equipment inside. Inside, the backpack is equipped on four sides with Velcro and MOLLE Velcro, which offers a multitude of possibilities for attaching equipment parts

In the back padding is a removable plate with an aluminum bar, which can be individually adapted to the back by shapes. The straps and belt are fully removable.

Three velcro pockets and two weapon holders with velcro backs are included in the delivery.

The Mudular Pack 30 is compatible with the TT VL charger pockets, the TT Internal Holster and the TT Modular Pouch Set, all of which have a velcro back and can be attached to the inside of the backpack.

Padded Back carrying system.

Shoulder straps adjustable in length.

Removable padded fins on the hips with zippered pockets.

Pocket on lid with small organizer.

Velcro MOLLE inside for modular extensions.

Incl. 3 x pockets for velcro accessories and weapon holders (velcro).

Volume: 30 liters.

Dimensions: approx. 46 x 30 x 18 cm.

Weight: approx. 1650 g.

Two of the pockets can be removed, the main compartment of the backpack has a large MOLLE Velcro surface, which makes it possible to complete it individually. In the bottom compartment is a reversible rain cover and a Tac marker. In addition, the two flat zippered compartments on the front provide additional storage space for utensils and documents. Other pockets can be added on the front. The shoulder straps and handles of the Survival Pack are easy to store, so the backpack can be easily stored in vehicles.

Both CORDURA® materials and straps, TL 8305-0278 or TL 8305-0281 for IRR camouflage effect (IRR 650 - 1250nm/ 10 - 42%).

Padded back

Two straps can be stored in the backpack

Carry handles can be stored in side pockets

Chest strap adjustable in height

Velcro surface on the front (velvet)

Reversible rain cover integrated with marking system in the bottom compartment

Two removable and scratchable interior pockets (4 l and 2.5 l) with transparent lid

Four fixed inner pockets (1x 6 l, 1x 2.5 l, 2x 0.5 l) with transparent lid

Separate compartment for the use of a hydration system

Two hooks for attaching additional pockets or panels to the front

Volume: 16 liters.

Dimensions: approx. 45 x 26 x 13 cm.