Side pocket accessible horizontally and vertically with ample storage space, two inner compartments as well as a Gear pocket with a detachable safety tab and pen pocket.

Trouser pockets with safety pocket.

Small Gear pocket.

Back pockets of trousers.

Double belt loops.

Elastic trouser belt.

Stretch inserts on the back.

Elastic inserts at the waist.

Stretch inserts on the back.

Elastic inserts at the waist.

Externally accessible pockets for UF PRO® Flex knee protectors.

Adjustment of the width of the hem of the trousers.

CORDURA® reinforcements at the knees and hem of the trouser leg.

Braguette with double slider.

Zipper at the hem of the trouser belt for the WINDSTOPPER® lining.

A comfortable thermal cap for winter activities

The Uf Pro® Watch Cap offers you thermal protection and efficient moisture management thanks to Schoeller® Climayarn® material

Thermal protection

Effective humidity management

Machine washable

Humidity management

machine washable 

merino wool 60%

Polypropylene 40%

Large ventilation openings at the front and rear.

Ventilation openings at the front and back of the cap allow air to circulate freely and keep the head fresh at all times. 

Wire integrated at the front and back, the edge can be formed in such a way that it adapts perfectly to the shape of the head. 

The circumference of the Boonie Hat can be easily adjusted using a paracord and drawstring on the back of the hat. 

Malleable edges thanks to a metal wire at the front and back.

Three Velcro surfaces for the IR marking and the badge of the association.

Buckles for camouflage material.

Paracord with drawstring for adjusting the head circumference.

Two mesh ventilation openings.

Inner mesh pocket.

Sizes: S/55-56, M/57-58, L/59-60, XL/61-62, 2XL/63-64

Lizard/Skin torso fabric extremely stretchy and abrasion resistant No-Melt/No-Drop

Knitted fabric of the torso reinforced with ceramic stitches. This results in exceptional protection against abrasion of the plate holders.

Lizard/Skin torso fabric is based on Lyocell/polyamide knitting

Exceptional breathability and extremely short drying time of the fabric (even wet).

At the hips of the Striker X Combat Shirt is breathable and breathable padding. 

The air/pac® pads are located at shoulder level. These 8mm thick inserts make it easy to carry a heavy plate holder or backpack on your shoulders.

Zippers along the upper part of your arms. 

The closure of the collar at 3 levels for adjustment

Inserts for elbows UF PRO Flex 

Closure of the collar with 3 levels with velcro.

Air/PAC® inserts at the shoulders.

2 pockets on the arm with velcro closure, pencil pocket with extra strap for easy opening.

Velcro at chest level to easily attach identification patches.

Special pockets for UF PRO elbow pads.

Padding at the hips.

Abrasion-resistant Lizard/Skin fabric for the torso.

Adjustable sleeve width.

Ergonomic sleeves, easy to roll up.

Extremely comfortable UF PRO® Striker XT Gen.2 combat shirt 

UF PRO® has combined different materials in the Striker XT combat jersey, which gives it robustness, comfort and quick-drying properties.

Sleeves made of strong and breathable Ripstop fabric

Abrasion-resistant knit torso area and armpit area made of merino-polyester anti-odor mixture. 

To protect the latter from abrasion, the outside of the fabric has been reinforced with a strong and comfortable braid.

Removable UF PRO® air/pac inserts (8mm) at shoulder level distribute the weight of loads, and optimize air circulation 

The sleeves consist of two upper pockets and two pockets under the arms. 

The pockets under the arms have an extra strap inside to secure small objects A MOLLE System applied to the top of the pocket, which allows any MOLLE-compatible pouch to be attached to it.

Ergonomic sleeves hold UF PRO® Flex elbow pads without strap fixation.

Integrated ventilation zippers on the back of the upper arm

Extra-long front zip.

Ventilation zips on the upper part of the arms.

air/pac® inserts at shoulder level.

Ergonomic sleeves, easy to roll up.

Abrasion-resistant and quick-drying knitwear in the torso area.

Merino/polyester anti-odor blend under the armpits, reinforced with a breathable nylon mesh.

2 x large pockets on the arm with velcro and extra strap for easy opening.

2x pockets under the arms with elastic straps on the inside and MOLLE on top for fastener

 collar lined in soft fabric.

Pockets for elbow pads UF PRO® Flex.

Comfortable and lightweight padding for your elbows

Uf Pro® flex pads are made for your activities requiring elbow cushioning.

As with all our protections, no external fixation is necessary. 

The inserts are available in thickness 6 mm. 

Inserts are compatible with most Uf Pro® jackets, shirts and polo shirts

Delivered in pairs

Excellent damping properties

Ability to form according to elbow geometry

RemovabRemovable insulation liner compatible with all P-40 and Striker pants

With this lining, you can convert all your P-40 or Striker range pants into cold pants.

Once inserted, the lining protects against wind and insulates against the cold.

The fixing is provided by a slide at the waist

Anatomical section

Antistatic

Windproof and breathable

Flat seams

le insulation lining compatible with all P-40 and Striker pants

With this lining, you can convert all your pants from the P-40 or Striker range into cold pants.

Once inserted, the lining protects the wind and insulates against the cold.

The fastening is ensured by a slide at the waist

Anatomical cut - Antistatic - Windproof and breathable - Flat seams

Foam technology that, under the effect of high energy, hardens enough to absorb excess and dangerous energy. 

Although the inserts have a compact structure, they offer excellent comfort thanks to excellent deformability, as they constantly adapt to the geometry of the elbow. 

In addition, they are distinguished by a sensationally low weight, about half that of other comparable high-tech protections.

UF PRO® Combat Shirts and Combat Jackets are cut in such a way that Flex elbow pads provide reliable, effective and comfortable elbow protection at the same time.

Uf Pro® flex pads are made for your activities that require knee cushioning.

No external fastening is required, just insert the knee pads into the P-40 or Striker pants

The inserts are available in thickness 6 or 8 mm. The 8mm version gives you better cushioning and is lighter. However, being thicker, it completely fills the pocket and decreases air diffusion at this level.

Delivered in pairs

SAS-TEC energy-absorbing memory foam

Contents: 2x UF PRO FLEX SAS TEC Elbow Protector Impact

Weight: 35 grams / per elbow guard

Based on popular P-40 pants, the P-40 Classic variant offers excellent freedom of movement, a comfortable fit and best-in-class knee protection.

Combination of robust and breathable ripstop material with advanced stretch material from Schoeller-Textil. Durable and expandable

Pocket configuration: 

side pockets, security pocket,

Smartphone pocket with tuck-lock, back pockets.

Double belt loops.

Stretch at the waist of the pants.

Light and breathable ripstop material.

Stretch fabric integrated in the upper part of the buttocks and in the hollow of the knees.

Inner knee pads for UF PRO® knee pads.

CORDURA® reinforcement at the instep.

Double zipper at the front.

Inner zipper for WINDSTOPPER® lining.

The Monsoon XT Uf Pro® trousers provide reliable rain protection for operators.

Specially designed to meet the highest quality requirements in terms of rain protection, but also to offer unparalleled mobility.

Made of Gore-Tex® 3 layers laminate, they can be easily stored in the smallest backpacks. The long double-slider side zippers allow you to put on your Monsoon overpants without having to take off your shoes and give easy and easy access to the pockets of your pants worn underneath. 

YKK® long side slides and double slider water repellents

Extended rear part made of elastic materials

Adjustable legs

Shoe covers with hook

Detachable shoulder straps

Pocket configuration:

The Monsoon XT trousers include:

Thigh pocket plated with water-repellent slider YKK®

Two pockets in the back part

Low Profile Pants 

Comfortable stretch fabric 

Robust and breathable Ripstop material combined with advanced stretch material from Schoeller-Textil. Durable and stretchy trousers, 

side pockets, security pocket, smartphone pocket with tuck-lock, back pockets.

Double belt loops.

Stretch at the waist of the pants.

Light and breathable ripstop material.

Stretch fabric integrated in the upper part of the buttocks and in the hollow of the knees.

Inner knee pads for UF PRO® knee pads.

CORDURA® reinforcement at the instep.

Double zipper at the front.

Inner zipper for WINDSTOPPER® lining.

The ultimate combat pants in hot environments

Schoeller-Dynamic®, Ripstop Poly/cotton and Cordura® stretch materials. 

"Fire and Forget" knee protection

Reliable protection against shocks or sharp objects 

Flexible inserts are knee-shaped. 

13 pockets 

In low temperature conditions, an inner slide allows you to attach a Windstopper® liner inside.

Ventilation rails at groin level

Double belt buckles for attachment of service or combat belts

Elastic in the belt

Uf Pro® triple layer knee protection system

Width-adjustable leg bottom zippered

Drawstring at the bottom of the legs

Double-slider slider rod

Zipper for removable inner lining

Hook for shoes

2 open front pockets

1 internal zipped pocket to the left front pocket 

2 zipped back pockets

2 pockets on the thigh 

2 thigh pockets with double access and internal compartment

2 laptop pockets plated on thigh pocket

2 lower leg pockets on the calf on the outside

Extremely sturdy construction, Ripstop fabric, pocket configuration and knee protection make it the ultimate combat pants.

Aerodynamic construction for minimal risk of hanging on 

Reinforcement at each seam 

Compatible with UF PRO knee pads 

Extremely durable Schoeller Dynamic Stretch panels

11 pockets,

Integrated hooks along the hem to secure the pants to the boots 

Compatible with UF PRO Windstopper windproof lining.

 2x hand pockets.

1x Security pocket with zipper in left insertable pocket.

2x back pockets with velcro flap.

2x multifunction pockets on the thighs with button flap, zippered side access, elastic drawstring and internal separation.

2x pockets on the thighs with button flap  

2x pockets on the thighs 

2x lower leg pockets with zipper.

Dorsal part raised and padded.

Double belt loops reinforced in CORDURA®.

Schoeller-Dynamic Stretch material in the upper back and buttocks.

Stretch inserts at the waist.

Adjustment of the width of the knees.

Adjustable width at the bottom of the legs.

Double zipper rod, slotted button and clamping hook.

Inner zip for WINDSTOPPER® lining

Instep and knees reinforced in CORDURA®.

Adjustable hem with hooks for boots.

6 belt loops in CORDURA

Schoeller-Dynamic® stretch materials, RipStop Poly/cotton (or Nyco for camouflage versions) and cordura®. 

Double belt buckles for attachment of service or combat belts

Uf Pro® triple layer knee protection system

Width-adjustable lower leg thanks to a zipper

Drawstring at the bottom of the legs

Braguette with double slider slider

Zipper for removable inner lining

Hook for shoes

2 open front pockets

1 internal zipped pocket to the left front pocket (ideal for change)

2 zipped back pockets

2 pockets on the thigh for knife or magazine

2 thigh pockets with double access and internal compartment

2 laptop pockets plated on thigh pocket

2 lower leg pockets on the calf on the outside

If there is a drop in temperatures, you can fit your Striker XT pants with a Windstopper lining.

UF PRO Waist/Flex System

Belt loops reinforced in CORDURA®.

Double fly zipper and hook closures.

Non-slip strip at the back of the waist.

Scholler-dynamic® stretch fabric at the knees and buttocks.

NyCo Extreme Ripstop fabric.

Front pockets with mesh ventilation openings and additional knife pocket.

Discreet security pocket.

Large side pockets with button closure, integrated elastic inner buckles and elastic grip strap on the top edge.

Versatile pocket on the thigh with mesh ventilation openings and side pocket accessible horizontally and vertically.

Pockets for knee pads made of technological material 37.5™.

Additional pocket for UF PRO Solid knee pads.

Knee area reinforced in CORDURA®.

Adjustable knee width.

Lower leg area adjustable in width.

Mesh ventilation openings at the legs.

Hooks for boots.

The UF Pro Polo Shirt Urban is a close-fitting polo shirt that offers excellent comfort and maintenance properties.

Thanks to its Cocona® fiber content of 53%, the UF PRO® polo shirt is not only beautiful, it is also comfortable, even in summer temperatures.

When worn or after washing, the polo shirt dries very quickly and if it is dried on a hanger, it is not even necessary to iron it.

 lightweight and anti-odor polo shirt

Quick drying 37.5™/ mixed cotton fabric

A neck made of the base material ensures that it remains beautiful even after many washes.

Anatomical section near the body.

Flat seams.

Made collar.

Embroidered UF PRO logo

ComfortT-shirt with a close-to-body fit that offers excellent comfort and care properties.

53% natural fibers (Cocona®), 43% cotton, 4% elastane.

When worn or after washing, the T-shirt dries very quickly and without the need to iron it.

Anatomical section near the body.

Flat seams.

able, lightweight and anti-odor T-shirt. The perfect choice for hot temperatures

Quick drying 37.5™/ mixed cotton fabric

The P-40 series offers almost unlimited comfort and mobility. Based on the success of its trouser models, Uf Pro® has designed shorts for hot days.

The P-40 shorts are based on a new concept in order to achieve maximum comfort and mobility.

Schoeller-Dynamic® stretch materials, RipStop Poly/cotton.

The shorts offer a total of 11 pockets

The P-40 shorts allow you to directly connect your belt with double buckles. 

Double belt buckles for attachment of service or combat belts

Elastic in the belt

Braguette with double slider slider

Zipper for removable inner lining

Pocket configuration:

2 open front pockets

1 internal zipped pocket to the left front pocket (ideal for change)

2 zipped back pockets

2 pockets on the thigh for knife or magazine

2 pockets plated on the thigh pocket for mobile

2 thigh pockets with double access and internal compartment

The UF Pro® AcE Winter Combat Shirt has a structure that ensures an optimal temperature while protecting elements. 

The sleeves are equipped with a high-performance anti-cold lining in G-Loft. 

Integrated air/pac® shoulder and upper back pockets provide extra comfort and protection. 

The closing of the ventilation openings allows the air/PAC® pockets to trap the air and provide additional insulation.

37.5™ fiber technology to wick sweat away from the body, 37.5™ fiber technology is 800 times more effective at evaporating sweat.

The windproof and water-repellent outer layer

Angled front zipper prevents clothing zippers from overlapping

8 mm thick air/pac® fabric inserts form a cushion and thus help distribute the weight of personal ballistic protective equipment or heavy backpacks

Windproof, waterproof and breathable outer fabric.

High performance cold protection in the sleeves.

Excellent body sweat management thanks to the Merino/polyester 37.5™ material in the sleeves and the comfortable micro-fleece at the front and back.

openings on the wrist warmers to allow you to look at your watch.

Reinforcements in Cordura® at the elbows.

Adjustable neck width.

Tactical winter jacket that owes its insulating properties to the proven G-Loft lining. 

Sturdy nylon outer fabric, woven in tight Ripstop, makes the jacket waterproof to wind and water and thus provides maximum protection on cold and snowy days.

Maybe compressed and stored in the inside pocket of the jacket. 

Windproof and water repellent.

Ultra lightweight.

2 front pockets.

Inner pocket to store the jacket.

Collar lined in fleece.

Velcro panels on the upper arms with pen pocket.

Insulated hood + removable UF PRO Hood/Harness system.

Cord at the waist.

Adjustable wrists.

Temperature Range: -15/-20°C

Jacket made of ePTFE breathable Softshell material and lined with an insulating microfleece.

• The windstop and water-repellent outer face, 

• AirPac® shoulder inserts to optimize carrying comfort

• Hood Harness® system to allow the hood to follow the head movement

• Waterproof hood laminated micro-grid 3 layers. 

• Chest pockets are accessible from two sides. 

• 4 pockets of mesh lined arms for small equipment 

• 2 large inner pockets 

• 2 internal pockets

• Water-repellent YKK® slides

• Junction mittens

• Tightening of laminated wrists

• Armpits lined in net for side ventilation

Ideal for cold winter conditions. 

A two-layer, windproof and water-repellent outer fabric, with 37.5™ microfleece, protects against the weather. 

The side walls give the Delta ML Gen.2 jacket breathability that keeps body temperature at an optimal level to prevent overheating. 

Abrasion resistance with a full backpack or heavy plate holder.

Windproof and water repellent.

Extremely lightweight.

Elastic side fabric.

Full length front zipper with inner windproof flap and anti-pinch protection.

Elastic cuffs and wrist warmers with openings for the watch.

2 zipped pockets under net at the front.

2 chest pockets under net.

2 pockets under net on the upper arms.

2 pockets under the arms with zipper.

2 inner mesh pockets.

Velcro surfaces for identification patches and pen holder on the pockets on the arm.

The jacket for extreme weather conditions.

Gore-Tex® weather jacket. Model from the sniper range with a long cut at the rear.

Designed in 3-layer laminated Gore-Tex® that provides reliable sealing, excellent wind protection and excellent breathability.

AirPac® Uf Pro® inserts to add lightweight insulation and prevent thermal bridges, but also to distribute the weight of heavy backpacks and vests 

The retractable hood with an adjustable harness according to your head circumference, allowing you to keep the hood open by following the movements of your head. 

2 ventilation slides under the arms. 

AirPac® inserts

Retractable waterproof hood

Water-repellent YKK® slides

Anatomical adjustment of size

Tightening of laminated wrists

a pocket at the top of each arm at the top

a pocket on each forearm

a pocket on each side on the chest with external access 

An inner pocket

The HUNTER FZ GEN.2 jacket is perfectly suited. It protects you against the weather, dries very quickly 

Windproof and water-repellent covering fabric with two layers of 37.5 mg microfleece, as well as a micro polar layer 

The thin, reinforced mesh side panels will protect you from overheating when you're active, giving you enough ventilation to keep your core temperature at an optimal level.

Extreme abrasion resistance.

6 tactical pockets

2 front pockets at the basin

2 forearm pockets

2 pockets on the forearms topped with velcro for better identification

Flanks covered with polar coconut fiber fabric 37.5™ from Cocona Inc. 

a pocket at the top of each arm at the top

a pocket on each forearm

a pocket on each side on the sides

Durable and comfortable protection made of 3-layer laminated Gore-Tex® which provides reliable sealing, excellent wind protection and excellent breathability.

AirPac® Uf Pro® inserts to add light insulation, prevent thermal bridges, distribute the weight of backpacks and combat vests.

The retractable hood with a harness system following the movements of your head. Harness adjustable according to your head circumference 

2 ventilation slides under the arms. 

AirPac® inserts

Retractable waterproof hood

Water-repellent YKK® slides

Anatomical adjustment of size

Tightening of laminated wrists

Opening for ventilation

a pocket at the top of each arm at the top

a pocket on each forearm

a pocket on each side on the chest with external access 

An inner pocket

Compatible with backpack and plate holders for temperatures between 5 and 15 degrees

. Anti-abrasion reinforced mesh sides

. Windproof and water-repellent two-layer covering fabric.

. Internal lining in 37.5™ microfleece 

. The side panels protect you from overheating when you are active, giving you enough ventilation to keep your core temperature at an optimal level. 

. 1 wide Velcro panel on each handle with pen slot.

. Elastic cuff on the wrists to avoid heat loss.

. 2 Zip pockets per sleeve

. 2 ventral Zip pockets

. Full-Zip zipper

STRIKER X. COMBAT SHIRT, The best comfort in its class combined with extreme robustness.

Anti-fusion and anti-drip design. Reliable protection for elbows.

Air/PAC shoulder inserts

2 upper arm pockets with Velcro closure

Pen pocket and extra strap with easy opening

Velcro straps on the chest

Closure of the 3-level collar by Velcro

Closure of the 3-level collar by Velcro

Elbow Pad - UF PRO Zipper Pouches

Platelet at the hips

Abrasion-resistant Lizard/Skin torso material

Adjustable handle width

Ergonomic and easy-to-roll handles

The torso material is very stretchy, abrasion resistant and does not melt.

This same material guarantees extreme comfort and long-lasting performance, not to mention excellent drying speed.

The sleeves of the shirt are made of a ripstop fabric that does not melt or drip.

This gives the garment low weight, great aeration and quick drying.

The pelvic crest area of the Striker X battle shirt has a breathable pad 

and breathable.

Air/PAC® pads are placed at shoulder level.

With a thickness of 8 mm, these pads greatly facilitate the wearing of a heavy plate holder or a backpack.

Ventilation slides

The UF PRO Flex-Elbow pads fit perfectly into the pockets provided at the elbows.

100% windproof

Highly water-repellent covering fabric

Waterproof hood with integrated Hood/Harness® system

High-performance thermal insulation

Reinforced sleeves and lower back in CORDURA®

Detachable powder shield skirt

Wrist warmers

Large inner pockets

Large front pockets

Side ventilation system with YKK® VISLON® easy slip zippers

Waist circumference adjustment  

100% nylon outer layer, windproof and water-repellent

Highly ventilated PU membrane

Fleece COCONA 37.5™ (collar, hood)

145 g G-LOFT® torso thermal insulation

Thermal insulation G-LOFT® 110 g in the sleeves

100% polyamide lining

100% CORDURA®

VISLON® YKK® zippers (armpits)  

WEIGHT

1.40 kg (size L)

Construction in 3 layers and not welded, cold and humidity are kept away from the body.

During strenuous activities, the ventilation openings on the side can be adjusted using zippers.

Integrated air/pac system prevents the straps of the backpack or plate holder from pressing directly on the shoulders.

Adjustment at the hem, wrists and side opening for a holster 

Hood with clear sight for the wearer thanks to the integrated Hood/Harness system.

-100% windproof and strongly water-repellent

-Management of steam on the body thanks to COCONA® Microfleece technology

-Fixed air/pac® inserts in the shoulders

-Waterproof hood with Hood/Harness® system

-Two front pockets

-Two pockets on the upper arms

-Long Vislon® side zippers for easy opening and closing

-Snap button for easy access to additional equipment

-Adjustment of the width at the collar

-Adjustment of the width to the size and the lower hem

New UF PRO Striker XT Gen.3 combat pants.

Waist/Flex system, which allows it to be individually and precisely adjusted to the size.

Lightweight, breathable stretch inserts to achieve exactly the right level of stretch at the waist

Integrated bottom belt secures the pants in its position and prevents it from sliding down or up.

The 3D padding for the lower back adapts to the curvature of the lumbar area and fills the space between the body and the trouser belt.

Ventilation openings on the legs with a zipper.

Integrated mosquito net lets in fresh air 

5-level knee height adjustment is comfortably hidden in the large side pocket

17 pockets offer ample storage space

UF PRO Waist/Flex system.

Schoeller® dynamic stretch fabric 

Belt loops reinforced in CORDURA®.

Additional Velcro in belt loops for better underbelt fit.

UF PRO® 3-layer knee protection system

Additional pocket for UF PRO Solid knee pads.

2X large ventilation openings with mosquito net at the thighs.

5-level vertical knee adjustment system.

Adjustable width at the bottom of the leg with Canadian button and vertical zipper.

Trouser bottoms reinforced in CORDURA®.

Inner zipper for removable WINDSTOPPER® lining.

The third generation of the Striker XT is even more powerful 

Extreme breathability, moisture wicking properties and robustness. 

New knit for the torso which, thanks to its lightness, gives the impression of being a second skin. 

dries extremely quickly and guarantees optimal comfort throughout the day. 

The Striker XT Gen.3 combat jersey is extremely breathable and wicks away moisture thanks to the 3D-Mesh fabric. 

The breathable, breathable hip padding prevents additional equipment on the hips from becoming a burden...

Two large pockets on the upper arms with zipper.

Long front zipper with merino neck padding.

Velcro flap with pen pocket.

Breathable and quick-drying torso material.

Breathable and breathable padding at the hips.

Inserts at the shoulders for efficient weight distribution.

Pockets for UF PRO Elbow padding

Uf Pro® flex pads are made for your activities that require knee cushioning.

No external fastening is required, just insert the knee pads into the P-40 or Striker pants

The inserts are available in thickness 6 or 8 mm. The 8mm version gives you better cushioning and is lighter. However, being thicker, it completely fills the pocket and decreases air diffusion at this level.

Delivered in pairs

Excellent damping properties

Ability to form according to knee geometry

Lightweight

3D tactical knee pads feature a special multidimensional shape that instantly adapts to your knees 

Protective material gives you the protection you need. 

You will easily forget that you wear them thanks to their lightness (only 71g / knee pad) and the absence of periodic readjustment with additional cords.

The IMPACT version is made of a special material that gives you comfort and - when you need it most - maximum protection. 

Under normal conditions, each tampon is very flexible. But at the moment of impact, they stiffen to ensure the safety of your knees.

Most optimal tactical jacket for extreme physical activities in freezing temperatures. The outer fabric protects from snow, wind, cold and other elements thanks to a windproof and highly water-repellent outer shell.

The sleeves are lined with a special blend of 37.5™ merino wool to improve the evaporation of body moisture,

The arms are lined with G-LOFT,® a lightweight thermal insulation that offers insulating properties similar to those of down

Thermal insulation reinforcement & fast drying time - Air/PAC® inserts form an 8 mm thick air barrier between your skin and the outer fabric. This helps retain hot air, which provides the necessary heat while drying extremely quickly.

Effective weight distribution - Since air/pac® inserts have a cushioning effect, they help distribute the weight of heavy backpacks or plate carriers.

Hood with hood/harness system

Top-notch thermal protection.

Windproof and water repellent.

Extremely efficient humidity management.

Reinforced elbows in CORDURA®.

Removable air/pac® inserts at the shoulders and upper back.

Two front pockets.

Front zip along the entire length.

Wrist warmers with openings for the watch.

This new generation basic cap has been redesigned for more comfort thanks to lightweight materials and its durable design. Its slightly more pronounced profile covers your head better to give you better protection from the elements.

The sturdy visor is now more curved. It gives you better protection from wind and rain, while keeping your eyes out of the sun's rays.

Five Velcro areas for unit patches and IR patches

Adjustable headband

materials: 

Black, Brown Grey, Steel Grey, Navy Blue and SloCam: 67% Polyester, 33% Cotton Tear-proof fabric (Ripstop)

Multicam® and Multicam® Black: 50% Nylon, 50% Cotton Tear-resistant fabric (Ripstop)

Flecktarn: 35% Polyester, 65% Cotton Tear-proof fabric (Ripstop)WEIGHT

0.08 kg (size L/XL

A-TACS U|CON (Universal CONcealment) is a variant of the camouflage pattern developed by Digital Concealment Systems. A-TACS stands for Advanced Tactical Concealment System and U|CON is one of the variants of the A-TACS camouflage pattern. A-TACS U|CON has a rather numerical pattern,The effectiveness of different patterns and colors can vary depending on the environment and situation. U|CON is a transitional camouflage pattern, i.e. it has been designed to provide effective concealment in transition areas between different types of terrain, for example in areas between dry and wooded terrain.

Details of the UF PRO M2 Parka / Smock:

Original printed material A-TACS U|CON.

Stand-up collar with partial fleece trim.

Two chest pockets with Velcro closure.

Two chest pockets with side zipper.

Two spacious front pockets with internal elastic attachment for gear.

Smock zippered lower back pocket with access from both sides.

Two zippered pockets on the upper arms.

Unlimited field of vision thanks to the movable hood.

Adjustable cuffs with Velcro closure.

Side zippers for ventilation and better access to the service weapon.

Safety buttons at the waist

Retractable hood.

Weight: approx. 1,250 g

The P-40 Blu-Flex features innovative 3D padding in the lower back for exceptional comfort and support when worn for extended periods. In addition, these tactical jeans are compatible with almost all belts - from the tactical belt to the leisure belt, of course.

These jeans are compatible with the 3D UF PRO touch pads (see for example article number 169026) and offer reliable knee protection without being noticed. The P-40 Blu-Flex Jeans has the perfect balance of pockets so you have exactly the right amount of storage space without looking cluttered. The clever pockets of the P-40 Blu-Flex tactic offer enough space for your most important utensils while offering a civilian look. The innovative Tuck-Lock system in the back pockets of the jeans ensures secure support of your equipment and guarantees freedom of movement without compromising accessibility - the Blu-Flex comes with 2 front pockets, 2 Tuck-Lock pockets (for example for magazines) and 2 back pockets.

The P-40 Blu-Flex Jeans was designed with a focus on everyday cleanliness - it combines functionality with the look and comfort of everyday jeans, allowing you to seamlessly transition from field activities to city life.

Details UF PRO P-40 Blu-Flex:

- Blu-Flex Waist system (compatible with almost all belts)

- Canadian button closure

- Tuck-Lock Bag

- 3D padding in the lumbar region

- Aerodynamic design

- Compatible with 3D touch pads

Material: 98% cotton, 2% elastane

Weight: 0.73 kg (size 34/34)