Tactec plate holder universal size

For all types of uses, professional or sports type CrossFit

Padded shoulder straps with aerospace-grade breathable mesh

GrabDrag extendable, reinforced and discreet back handle 

Padded interior panels at the front and rear with large air intakes

Can hold 2 ballistic protection plates SAPI Medium or Large (25x30cm)

One-handed activation cable system to quickly offload the entire plate holder

Water-resistant coating

Many Soft passers-by on the whole

Wide band of passers Soft laser Cut self-gripping female, ideal for wearing your favorite patches (front/back)

Minimalist, discreet and lightweight pocket

Contains 1 PA type charger

Double retention system with a discreet insert and a wide elastic band that compresses the pocket

No flap or bungee system is required to secure the charger

The concealed insert holds the top of the pocket open to allow easy insertion/extraction

Soft 1/2" Flex-HT™ on the back for more weaving possibilities (pocket height adjustment or belt fastening)

Flex-HT™ 3/4" soft fastener in soft TPU for easier weaving

Pull to quickly release Flex-HT™ soft fastening straps

2 Flex Hook adapters included 

Drainage port at the bottom of the pocket

Double pocket for 2 chargers

Suitable for PA chargers or equivalent

FLEX-HT™ mounting system

Installs on any MOLLE or Hexgrid® platform

Short pocket height with internal PC compression

Strap reinforcement for abrasion and durability

Drainage hole

Minimalist, discreet and lightweight pocket

Contains only 1 AR/M4 charger

Double retention system with a discreet insert and a wide elastic band that compresses the pocket

No flap or bungee system is required to secure the charger

Concealed insert keeps the top of the pocket open for easy insertion/extraction

Soft 1/2" Flex-HT™ pass on the back for more weaving possibilities (height adjustment of the pocket or belt fixation)

Soft Flex-HT™ 3/4" fastener in soft TPU for easier weave

Pull-pull to quickly release Flex-HT™ soft fastening straps

2 Flex Hook adapters included

Drainage port at the bottom of the pocket

water resistant

Minimalist, discreet and lightweight Admin pocket

Laser-cut horizontal soft platform

Zipped main compartment with shockproof cord for an adjustable opening degree up to 180°

3 internal pockets with holding elastics to secure accessories

1/2" Flex-HT™ soft loops on the back for more weaving possibilities (height adjustment of the pocket or belt attachment)

Soft Flex-HT™ 3/4" fastener in soft TPU for easier weave

Pulls to quickly release Flex-HT™ soft fastening straps

2 Flex Hook adapters included 

Drainage port at the bottom of the pocket

water resistant

Minimalist, discreet and lightweight pocket

Contains 2 AR/M4 type chargers

Double retention system with a discreet insert and a wide elastic band that compresses the pocket

No flap or bungee system is required to secure the charger

Concealed insert holds the top of the pocket open for easy insertion/extraction

Soft 1/2" Flex-HT™ pass on the back for more weaving possibilities (height adjustment of the pocket or belt fixation)

Soft Flex-HT™ 3/4" fastener in soft TPU for easier weave

Pull-pull to quickly release Flex-HT™ soft fastening straps

2 Flex Hook adapters included 

Drainage port at the bottom of the pocket

water resistant

The Drop Flex tote bag is multifunctional

Load shedding your chargers

Container of cases on the launch pads

Medical container type used dressings, cotton, gloves

Canine container and safety

Container for all your sports or outdoor practices (excavations, gemologies, etc.)

zippered pocket to reduce volume when not in use; Release there when necessary. 

Top of the pocket stiffened to keep a convenient opening. 

Thanks to the Flex-Hook adapters, you can adapt this pocket on MOLLE or hook-and-loop.

Hardpoint M3 stainless steel carabiner with 2 automatic closures and which fits perfectly on MOLLE, Hexgrid® or similar load-bearing platforms.

The edges are serrated for adhesion and the finish is non-glossy.

The hook design prevents the carabiner from turning on the loop and always staying in place on the platform.

double carabiner

Double automatic closures with steel spring

Powder finish

* Not designed for climbing

A total of 17 compartments and 1 hydration bag slot 

1 spacious main compartment with mesh zipped pockets

1 discrete compartment Hidden CCW lined velcro to place a holster (quick access on the front of the bag) 

Location for a hydration tank on the back

Padded inner laptop pocket

Zipped pocket in micro fleece

Front compartment with organizer (consisting of 9 pockets) 

Main opening up to 180° (U-shaped)

Key hook

2 external compression straps

Adjustable padded shoulder straps, ergonomic

Quick release clip on each shoulder strap

Height-adjustable chest strap

4 attachment points under the bag for additional equipment

High carrying handle

Many MOLLE passers on the front and sides (allows additional carrying) 

Patch location and patronymic band

Orifice for routing pipes or communication cable

YKK® zippers

Glove-Friendly pulls easily accessible with gloves

Compatible with Rush™ Tier system to attach MOAB 6 and MOAB 10

Signature design 5.11 Center Line™

Coating: 2X PU

Backpack offering a total of 26 pockets and compartments  

Spacious main compartment with mesh zipped pockets 

Padded laptop compartment

Concealed CCW compartment (discreet Velcro-lined pocket to place a holster in quick access)

Main opening up to 180° (U-shaped)

Zipped pocket in micro fleece on the top (bezel ...)

Double outer butterfly pocket on the front 

Front organizer compartment (consisting of 10 pockets)

Key hook

2 side pockets

Location for a hydration tank at the rear

Orifice for routing pipes or communication cable

High carrying handle

Many MOLLE passers on the front and sides (allows additional carrying)

2 external compression straps

Height-adjustable chest strap

Padded and ergonomic adjustable shoulder straps 

Quick release clip on each shoulder strap

4 attachment points under the bag for additional equipment

Patch location and patronymic band

YKK® zippers

Glove-Friendly pulls easily accessible with gloves

Signature design 5.11 Center Line™

Compatible with Rush™ Tier system to attach MOAB 6 and MOAB 10

Coating: 2X PU

Large luggage with wheels, sturdy and water resistant

False bottom zipped allowing the storage of a long weapon type AR

Castors tested up to 68 Kg load (replaceable)

Main compartment: 101.6 x 52 x 41.2 cm

5 outer zipped pockets

2 flat pockets for documents

Removable buckle strap for pairing other luggage

Write-bar™ writable tape, name tag, badge holder and document pockets

water resistant

Impact-resistant PE panels

YKK® lock-compatible closures

Pads, axles and corners in reinforced polymer

Reinforced background

Quickly get through metal detectors and safety gates with TDU® strap belts

Non-metallic, space-saving and silent buckle allows precise blocking. 

Can turn into a carrying strap.

Versatile and extremely resistant

Non-metallic buckle

Width: 1.5" (3.8 cm)

Padded pockets for your protection and that of your equipment.

Side pockets that can hold items of small or medium size.

Front main panel with charger pockets and internal compartments. 

The tote for ammunition and the removable casing bag allow you to take only the bare necessities.

The front wall can be opened and lowered to provide a convenient workspace.

Total volume: 43 liters

Main compartment: 24 x 44.5 x 26.6 cm

Front pockets: 21.5 x 19 x 6 cm

Back pocket: 21.5 x 39 x 6 cm

Left side pocket: 21.5 x 12.7 x 5.7 cm

Right side pocket: 20 x 19 x 6 cm

Bottle pocket: 14 x 7.6 x 5.7 cm

Removable bag: 18.4 x 40 x 14.36 cm

Lightweight and breathable

Teflon-treated® Rip stop fabric for better stain and soil resistance

Total of 12 pockets 

2 cargo pockets with 2 discreet slots to store chargers in each

2 discreet front sleeves quickly accessible for PA chargers or other accessories

2 deep hand pockets reinforced on the edge for wearing accessories with clip

2 back pockets

The flap of the pockets are self-gripping velcro®

Elastic waist

Authentic YKK ® zippers and Prym ® pressures.

Double knee reinforcement with internal pockets to add discreet knee pads 

Stretch blue denim pants

Slim cut

Style 5 pockets and 2 back hip pockets

Fitted belt with wide passers-by

Elastic Denim fabric (283g), soft finish and washed by enzyme

Reinforced seams

Contrasting seams on the Dark wash while on the indigo they are invisible

Button and zipper YKK®