The Razor HD 4000 is the indispensable companion of the hunter, archer and extreme shooter. The highly efficient angle compensation laser rangefinder offers four targeting modes (normal mode, first mode, last mode and extended laser range mode) for any range environment.

The main HCD (Horizontal Component Distance) range mode provides key information of the compensated angle range required by the vast majority of shooters in a simple and quick to read display. The Razor HD 4000 also features a LOS (line of sight) range mode and a scanning function.

Technical Specifications: 

Reflective Target 3600m max

Tree/ Deer 2200m 

Max. angle reading + / - 70 degrees

7x magnification

Diameter of the lens 25 mm

Linear field of view 341.25 ft @ 1000 yds

Angular field of view 6.5 degrees

Eye relief 16-19 mm

Length: 11.5 cm

Width 3.4cm

Weight 255g

The Razor AMG UH-1 GEN II is fast, intuitive and technologically advanced for lightning-fast, close engagement. 

This holographic sight is not afraid of shocks because all the electronic parts are integrated in a box on silent block which prevents sensitive parts from directly touching the body of the UH-1.

The UH-1 is sold with a CR123 battery, it is possible to replace it with a rechargeable LFP123A, on the side of the case is a micro-SD socket common to all cameras to search for it.

From the front, it is impossible to see the reticle even in the dark night.

The system is waterproof up to 20 meters.

Technical data:

Mounting type: Picatinny quick mounting without tools

1x magnification

Colour: Bright Red

15 brightness adjustment positions

Dot Size: 1 MOA

Graduation 1/2 MOA

Travel Per Rotation 16.5 MOA

Elevation adjustment:  100 MOA

Drift Adjustment:  100 MOA

No adjustment Paralaxe

Length: 9.91cm Length

Weight: 329g

This holographic Red Dot is ultra-thin, which allows it to be installed on any type of weapon.

The intensity settings are on the left side.

There is no need to disassemble the Red Dot to change the battery, which allows not to lose the zeroing.

Point size: 3 Moa/6 Moa

Setting clicks: 1 Moa

Maximum elevation: 130 Moa

Total drift: 100 Moa

 Quick Release Cantilever Mount is designed to mount telescopic riflescopes with 30mm tubes on a flat AR-15 type rifle. The shift of this cantilever mount positions the scope in a forward position, providing correct eye relief and head positioning when used on an AR-15.

Center reach height: 37 mm (1.45 inches)

Screw bit size: 9/64 inch

Weight: 8.9 oz or 252 g

Precision machined in 6061 T6 aluminum.

Hard coating Type 3 Mil-Spec anodized for lifetime performance.

Magnifier versatile 3X higher level, when you need it for your red dot or holographic viewfinder in an ultracompact, lightweight and optically sharp case.

The built-in quick release allows quick assembly/disassembly while the camlock engages/disengages the optics by direct pressure.

The adjustable folding mount allows use for right-handed or left-handed.

The Magnifier Micro3x will work with any of our red dots.

Adjustable focal length for perfect red dot sharpness.

Micro3x mounts on an absolute co-witness or 1/3 co-witness

Monobloc mounting for 30mm diameter bezel, 40mm height, 2" offset.

-Manufacture: Aluminium.

-Surface treatment: Milspec 3 certified.

-Offset 2".

-height 1.59" = 40.39mm.

Our point of view:

Mounting for picatinny rail, ideal for AR15 type platforms. 

The Cantilever has been specially developed for AR platforms. This one-piece assembly will perfectly integrate optics with a diameter of 30 mm on Picatinny/Weaver rail - Aluminum structure - Intended for 30mm tube - Torx screw tightening - Horizontal offset 50.8 mm - Height of the base in the center of the reticle 40.39 mm - 189 grams

When the situation demands fast shooting even with two eyes open, the new SPARC AR compact bezel offers natural light and excellent performance characteristics. This model was designed specifically for weapons like the M4.

The two-part modular base offers two separate mounting heights for customization depending on the weapon or shooter: 37mm , 40mm.

Rear digital controls for on/off, point brightness and night vision mode

Aircraft grade 6061-T6 aluminum body with tough rubber protection

Magnification: 1 x

Multi-layer anti-reflective coating on the lens for better light transmission

Sealed with O-rings that prevent moisture, dust and debris from entering for reliable performance in all environments

Perfectly anti-fog thanks to the Red Dot purge by Nitrogen

Automatic red dot standby after 12 hours

-Works with AAA battery (300-5000 hours duration depending on point intensity)

Lens diameter: 24 mm

Eye relief: unlimited

Point Size: 2 MOA

10 different light intensities with night vision compatibility for the two weakest

Adjustment scale: 1 MOA

Maximum rise setting: 90 MOA

Maximum Wind Correction Setting: 90 MOA

Parallax setting: free

Length: 7.3 cm

Weight: 212 g

 Point 2-MOA, is easy to acquire and promotes rapid engagement of targets, but it is fine enough to engage targets more accurately from a distance. 11 levels of brightness intensity allow shooters to respond to the intensity of the point depending on the situation. The skeletonized mount offers two height options (Co-Witness 1/3 lower and upper) - lending its functionality to AR-15, shotguns and pistols.

This compact and robust red dot viewfinder offers unlimited eye relief and field of view.

The sophisticated prism-based design allows for a more compact optical system without sacrificing optical quality.

The SPITFIRE AR is also equipped with two removable Picatinny rails.

Magnification: 1 x

Red dot / green dot

Lens diameter: 25 mm

Multi-layer anti-reflective coating on the lens with air separation for better light transmission

Sealed with O-rings that prevent moisture, dust and debris from entering for reliable performance in all environments

Perfectly anti-fog thanks to the purge of the Red Dot by Nitrogen

Spring Lens Cover

Aeronautical aluminum structure black matt "shockproof" resistant to recoil and impact

Eye relief: unlimited

Tube diameter: 30 mm

Twelve different light intensities for the point

Operating temperature -30°C to +50°C

Adjustment scale: 1/2 MOA

Maximum rise setting: 120 MOA

Maximum Wind Correction Setting: 120 MOA

Length: 10.9 cm

Weight: 317 grams

The clamps of the Pro series combine reliability and durability with high-quality machining to ensure ultimate precision and consistency. Simplified, lightweight and durable, these rings use four Torx T-25 type socket head screws for safe mounting.

Type 2 black matt anodized

Specifications of laser engraved torque

Integrated recoil lug

Made in the USA

Technical features:

Center Bezel:

Low: 0.90 inches (22.86 mm) - Weight (per ring):  44.7 gr (1.58 oz)

Medium: 1.0 inches (25.4 mm) - Weight (per ring): 48.7 gr (1.72 oz)

High: 1.26 inches (32.0 mm) - Weight (per ring): 50.7 gr (1.79 oz)

Extra-High: 1.54 inches (39.1 mm) - Weight (per ring): 53.8 gr (1.9 oz)

Mount compatibility: Picatinny and Weaver

Composition: 

2 rings of the Pro series

T-25 torx wrench

2 additional screws

The latest evolution in the RAZOR family, the RAZOR HD Gen III 1-10x24 offers the most front-end performance for those who demand the versatility of a 1-10x zoom.

Shooters will appreciate the clarity of an HD optical system and a bright and clear reticle in a case that weighs the same as the 1-6x model. This bezel ensures reliable and durable performance in all conditions, both in confined space or for long-range shooting. 

Technical characteristics:

Magnification: 1-10x

Lens diameter: 24 mm

Eye relief 7.62 cm

Field: 35m to 90m

Tube size: 34 mm

Turret: Under Hood

Adjustment scale: 0.1 MRAD

Turret revolution: 10 MRAD

Max elevation: 30 MRAD

Max drift: 30 MRAD

Parallax setting of: fixed 150yrd

Length 25 cm

590g weight