Uf Pro® flex pads are made for your activities that require knee cushioning.

No external fastening is required, just insert the knee pads into the P-40 or Striker pants

The inserts are available in thickness 6 or 8 mm. The 8mm version gives you better cushioning and is lighter. However, being thicker, it completely fills the pocket and decreases air diffusion at this level.

Delivered in pairs

Excellent damping properties

Ability to form according to knee geometry

Lightweight

3D tactical knee pads feature a special multidimensional shape that instantly adapts to your knees 

Protective material gives you the protection you need. 

You will easily forget that you wear them thanks to their lightness (only 71g / knee pad) and the absence of periodic readjustment with additional cords.

The IMPACT version is made of a special material that gives you comfort and - when you need it most - maximum protection. 

Under normal conditions, each tampon is very flexible. But at the moment of impact, they stiffen to ensure the safety of your knees.

This Micro SLR viewfinder with red or green crosshairs is distinguished by its switchable crosshairs, efficient solar mode with automatic light intensity adjustment, rugged aluminum housing with titanium hood and low weight.

In addition to the 500 Series switchable crosshairs and the C Line solar cells, they all have an intelligent Shake Awake™ feature for exceptional autonomy, no absolute parallax, beveled front lens (Micros and Tubes) and 12 levels of light intensity (2 night, 10 day) for manual adjustment of the intensity according to the different light conditions.

Materials: Titanium

Case colour: black

Weight: 207 g

IP protection rating: IP68

Operating temperature: -10°C - 50°C

Storage temperature: -40°C - 70°C

Warranty: 2 years

Range: 50000 hours

This open SLR viewfinder (Mini) with green crosshairs is distinguished by its switchable crosshairs, efficient solar mode with automatic light intensity adjustment, large lens and rugged aluminum housing with titanium hood.

In addition to the 500 Series switchable crosshairs and the C Line solar cells, they all have an intelligent Shake Awake™ feature for exceptional autonomy, no absolute parallax, beveled front lens (Micros and Tubes) and 12 levels of light intensity (2 night, 10 day) for manual adjustment of the intensity according to the different light conditions.

Material: 7075 Aluminium

Case colour: black

Weight: 75 g

IP protection rating: IP67

Color of reticle: green

Range: up to 50,000 hours

Operating temperature: -10°C - 50°C

Storage temperature: -40°C - 70°C

RMR compatible mounting

This open SLR viewfinder (Mini) with a red reticle is distinguished by its switchable reticle, efficient solar mode with automatic light intensity adjustment, large lens and sturdy aluminum housing with titanium cover.

In addition to the 500 Series switchable crosshairs and the C Line solar cells, they all have an intelligent Shake Awake™ feature for exceptional autonomy, no absolute parallax, beveled front lens (Micros and Tubes) and 12 levels of light intensity (2 night, 10 day) for manual adjustment of the intensity according to the different light conditions.

Material: 7075 Aluminium

Case colour: black

Weight: 75 g

IP protection rating: IP67

Operating temperature: -10°C - 50°C

Storage temperature: -40°C - 70°C

Range: 20000 hours

Warranty: 3 years

RMR compatible mounting

This HYBRID closed SLR viewfinder with red reticle offers a multi-reticle system with switchable reticles, a closed construction, an efficient solar panel with automatic brightness control, a wide front lens and a durable aluminum housing.

It is ideal for the highest demands and defies wide temperature ranges, dirt and weather.

Reticle: 2MOA Dot, 65 MOA Circle

Aluminum housing

Support: Torx-Picatinny

Base: Picatinny / Weaver

Battery compartment: built-in bottom

Battery type: CR 2032

Lens size: 23 x 30 mm lens and 29 x 23 mm eyepiece

Colour: black

Ttechnology: LED  

Autonomy: 50.000h dot / 10.000h circle dot

Operating temperature: -30°C - 60°C

Storage temperature: -40°C - 70°C

Weight: 230 g

IP protection rating: IP67

This ELITE REFLEX Micro viewfinder with green crosshairs is distinguished by its switchable crosshairs, efficient solar mode with automatic light intensity adjustment, robust aluminum housing with titanium hood and low weight.

In addition to the 500 Series switchable crosshairs and the C Line solar cells, they all have an intelligent Shake Awake™ feature for exceptional autonomy, no absolute parallax, beveled front lens (Micros and Tubes) and 12 levels of light intensity (2 night, 10 day) for manual adjustment of the intensity according to the different light conditions.

Materials: aluminium7075

Case colour: black

Weight: 199 g

IP protection rating: IP68

Operating temperature: -10°C - 50°C

Storage temperature: -40°C - 70°C

Warranty: 10 years

Range: 20000 hours

This ELITE COMPACT HE503C-U-GR viewfinder with green crosshairs features switchable crosshairs, efficient solar mode with automatic light intensity adjustment, rugged aluminum housing with titanium hood and low weight.

In addition to the 500 Series switchable crosshairs and the C Line solar cells, they all have an intelligent Shake Awake™ feature for exceptional autonomy, no absolute parallax, beveled front lens (Micros and Tubes) and 12 levels of light intensity (2 night, 10 day) for manual adjustment of the intensity according to the different light conditions.

Materials: aluminium 6065

Case colour: black

Weight: 98 g

IP protection rating: IP68

Operating temperature: -10°C - 50°C

Storage temperature: -40°C - 70°C

Warranty: 10 years

Range: 20000 hours

Dimensions: 30x63x37 mm

Small-sized closed-spot red pattern manufactured by Holosun.

Machined by CNC from anodized 6061-T6 aluminum alloy with matt black coating, this miniature viewfinder weighs 140g and has dimensions of 71x36x69mm. The IP67 standard makes it resistant to water and dust, as well as shocks.

The 20 mm lens glass is covered with a multi-reflection and scratch-resistant coating. A ACSS CQB crosshair with a 1/2 MOA setting value is available. A LED provides two NV modes and ten brightness levels. Parallax-free, with unlimited eye relief, ACSS reticle, 50 MOA drift and elevation adjustment, the HS503G ensures fast and accurate acquisition of the target in all weather and light conditions.

Power is provided by a single CR2032 battery in a screw-in housing, giving it 20,000 hours of battery life with average point brightness. It also has rubberized controls and a "Shake Awake" system that saves the battery.

The set includes a low Co-Witness mount and 1/3, a cleaning cloth and installation keys.

SPUHR mounting rail, allows to mount any accessory compatible with the picatinny system.

External bubble level assembly designed to attach forward to the bezel support body or ring.

Perfect solution for shooters who can’t focus on the integrated level in the standard ISMS series or who have a model without an integrated level.

The angle of the connection can be adjusted with two adjustment screws. Includes screws.

Weight: 20 g

System to quickly upgrade a bezel with its weapon.

The kit is particularly useful when using two rings instead of a one-piece assembly.

System to install a red-dot on the SPUHR mounts, whether of bezel or spotting scope.

Ideal for self-defense or short range shooting.

10 degree leveling key to adjust bezel rotation.

For SPUHR mounting only.

Also known as «corner», Included with all standard height SPUHR monoblock fixtures.

The SPUHR cantilever assembly is designed to mount a bezel on an AR type weapon.

It allows to have the bezel a little more forward than a conventional mounting.

The machining quality is perfect and allows many configurations.

A bubble level is integrated into each installation.

A key allows to upgrade the bezel with mounting.

On the rings it is possible to mount various accessories, such as a Picatinny rail for the addition of a Red Dot Reflex or an attachment for a night vision system.

The SPUHR monoblock assembly is considered one of the best in the world.

The machining quality is perfect and allows many configurations.

A bubble level is integrated into the assembly.

A clever key system is used to perfectly upgrade the bezel with mounting.

On the assembly it is possible to mount various accessories such as a Picatinny rail for the addition of a Red Rot Reflex, a night vision system. an inclinometer, etc

This system is part of the mandatory package when shooting on site, whether in the mountains or in urban areas.

Let’s take the example of a shot at 800 meters from a cosine angle . 74.

The corrected distance will be 800 x 0.74 = 592 meters or nearly 200 meters less, which is huge in view of the arrow of a bullet.

The ERATAC Bubble Level attaches to any Picatinny rail.

Bubble protected by a rotating cover.

Can be placed left or right.

Rail Picatinny 5 Slots, allows mounting red stitch and various accessories on ERATAC fixtures.

Length 55mm

Height 10mm

It is fixed with Torx screws, included.

The pack contains 16 different heads, two 25- and 45-pound bits and 2 handles or a T-handle.

All in a cordura deluxe kit.

Our point of view:

The FIX IT STICK removable screwdrivers have the characteristic of having bits calibrated according to the desired torque. Each tip has a specific torque and is recognizable by a color code. The tightening torques we propose are those recommended for the assembly of glasses

SPUHR and equivalents.

(45 pounds for mounting clamping and 25 pounds for ring clamping).

The pack contains the complete cleaning kit for your weapons and lenses in a Soft pouch.

Tools Specific Glock, 1911,AR15, Cal.12

T-Handle Wrench

65 Inch Lbs miniature torque limiter

45 Inch Lbs miniature torque limiter

25 Inch Lbs miniature torque limiter

15 Inch Lbs miniature torque limiter

1/2" Socket and Bit Adapter

Universal Choke Tube Wrench

1911 Bushing Tool

Glock Front Sight Bit

Mini Pry-Bar

Bolt Carrier Group Scraper 

Metal Pin Punch

Castle Nut Wrench 

Bronze Scraper

Steel Pick

Non-Marring Plastic Pin Punch

Cleaning Brush Bit

A2 Front Sight Adjustment Bit

Set of Brass Cleaning Rods (can accept 8-32 threaded attachments)

Set of two bit adapters to allow for 8-32 threaded components

24 Chrome Plated 1/4" Bits

Magnetic Patch

Soft Carrying Case

The pack contains the complete cleaning kit of your AR15 in a Soft pouch,

to which is added the clamping tools to the cut necessary for mounting your optics or accessories screwed on your AR.

Set of Fix It Sticks

Bolt Carrier Group Scraper 

Metal Pin Punch

Castle Nut Wrench 

Bronze Scraper

Steel Pick

Non-Marring Plastic Pin Punch

Cleaning Brush Bit

A2 Front Sight Adjustment Bit

Set of Brass Cleaning Rods (can accept 8-32 threaded attachments)

Set of two bit adapters to allow for 8-32 threaded components

12 Chrome Plated 1/4" Bits

Soft Carrying Case

Têtes de serrage au couple 15 . 25 . 45 . 65"/lbs

The pack contains the complete cleaning kit for your AR15 in a Molle pouch.

Set of Fix It Sticks

Bolt Carrier Group Scraper 

Metal Pin Punch

Castle Nut Wrench 

Bronze Scraper

Steel Pick

Non-Marring Plastic Pin Punch

Cleaning Brush Bit

A2 Front Sight Adjustment Bit

Set of Brass Cleaning Rods (can accept 8-32 threaded attachments)

Set of two bit adapters to allow for 8-32 threaded components

12 Chrome Plated 1/4" Bits

Soft Carrying Case

The MOE - Mil-Spec (Magpul Original Equipment) is a replacement stock for AR15/M16 rifles using mil-spec size receiver extension tubes.

Designed for quick and light action, the simplified A-frame profile prevents stalling and protects the release latch to prevent accidental activation.

The Mil-Spec model features a standard 0.8 cm thick rubber cover plate that provides extra grip even with ballistic protection or a vest.

Weight: 226 grams

Length: 17.5 cm

Maximum elongation from folded stock: 7.8 cm

 Not suitable for a HK 416

The Magpul CTR (Compact/Type Restricted) - Mil-Spec is a replacement stock for AR15/M16 rifles using Mil-Spec size receiver extension tubes. Designed for quick and light action, the A-profile avoids snags and protects the release latch to prevent accidental activation.

The CTR also features an additional friction locking system that minimizes excessive lacrosse movements for greater weapon stability and an ambidextrous QD strap holder that accepts any push-button sling pivot.

The Mil-Spec features a standard 0.3" rubber pad, which allows positive shoulder cushioning to prevent slippage even with a bulletproof vest or modular equipment.

Based on the proven MBUS Pro platform, the MBUS Pro Offset Sights is part of an effective sighting system to complement the magnifying optics on the M1913’s Picatinny mounting surfaces. In the case of a damaged or non-functional primary lens, or a nearby target, rotating the rifle to 45 degrees provides the shooter with a complete and fast sighting solution.

The MBUS Pro Offset Rear Sight features a durable Melonited steel construction, positive trigger lock when deployed, tool-free alignment adjustment for easy zeroing, double rear eyelets and a low profile to ensure compatibility and reduce interference with most rifles.

Made in the USA.

The M-LOK hand-stop kit serves as a lightweight, low-profile M-LOK indexing point for better weapon control, or as a front stop to prevent the shooter’s hand from reaching the hot muzzle brake.

The kit includes an M-LOK hand stop, M-LOK index panel and M-LOK type 2 rail cover so that the individual user can configure their kit as they wish.

This kit also includes an adapter for use with polymer hand guards/ hand guards equipped with Magpul M-LOK as well as other aluminum hand guards with wider profile.

Allowing a wider range of mounting location options, the M-LOK AFG is ¾ "shorter than the AFG-2, while retaining a similar grip surface.

Even though the M-LOK AFG is more compact than its predecessors, it takes into account the body’s natural mechanics to provide a comfortable and stable user interface that reduces fatigue and allows for more accurate weapon control.

By positioning the shooter’s hand high on the centre line of the barrel, unlike conventional vertical front handles, the M-LOK AFG helps to mitigate recoil and control the weapon to facilitate faster and more accurate continuous fire.

All the necessary material for fixing directly to the M-LOK slots on the aluminium or polymer handrails and futes is included.

The Hand Stop Kit is a covert rail configurable in 4 parts.

It allows a better grip of the hand guard with, in addition, two inserts to maintain the grip.

The innovative design adapts to all QD interfaces of standard size and allows to obtain a less imposing strap assembly that offers a handling of one hand, a high resistance ball head that rotates freely, prevents the strap from turning and channeling to avoid turning, and superior corrosion resistance with a Melonite finish.

The two lateral release tabs prevent accidental release.

Quick disconnect strap for 1-1/4" strap.

To be combined with the MS1 strap for a dedicated two-point strap, or with the MS1 MS4 adapter for a two-to-one convertible strap.

M-Lok® 2-piece rail covers attach directly to most M-Lok® aluminum handrails. 

The TSP texture offers a very good grip while keeping a low profile and completely customizable by mixing elements of different colors.

Set of 6 M-Lok® rail covers separable in 2 parts

The M-LOK™ QD attachment provides a forward attachment point for the Magpul MS4 strap and other QD push button straps.

Made of aluminum, it has beveled edges to reduce snags and an anti-rotation design that prevents swivel swivels.

The Magpul bipod with attachment for Grenadière offers versatility and solidity for an excellent quality/price ratio.

Manufactured to MilSpec standards in 6061 T6 aeronautical aluminum and polymer, it is lightweight and robust.

Its surface is anodized with a precision tolerance that reduces grinding.

The MagLink is a coupler for PMAG 30 and 40 AR15/M4 cartridges* that allows the user to attach two magazines together for faster reloads and keep additional ammunition accessible at all times on the weapon.

The MagLink features a two-piece bolted design and a durable, lightweight reinforced polymer construction.

This coupler is compatible with PMAG 30 and 40 cartridges GEN M2 MOE and GEN M3.

Ladder panels offer a very low profile Picatinny 1913 rail cover.

The Santoprene material provides a rubbery surface for better gun control and rail protection.

Easily cut for custom lengths, each panel fits one side of a rifle length rail (18 slots).

One panel per package.

The Magpul "AR Enhanced Magazine Release" Expanded Charger Plunger offers an expanded contact surface for fast and efficient charger changes.

Easy installation it does not require the action of a gunsmith.

M-LOK Type 1 rail covers have a clean profile and are installed directly on M-LOK compatible systems.

Made of a flexible, lightweight and extremely heat-resistant material, they offer an improved grip surface.

They cover 6 full M-LOK slots, but they can be cut for a custom length or to combine different colors.

1 batch of 2 M-Lok® Type 1 rail covers

The MIAD® (MIssion ADaptable) GEN 1.1 TYPE 1 pistol handle replaces the original handles of most AR15/M4 and some AR10. It allows to have an improved and personalized ergonomics in its hand thanks to its interchangeable front and rear parts. It has an internal storage core for carrying a lubrication bottle.

CLIP Magpul straps for attaching a 1-1/4" weapon strap.

The Paraclip™ is lockable and compatible with ASAP®, RSA®, MSA®, SGA® Receiver Sling Mount and many other sling buckle attachment points.

To be combined with a MS1® strap for a 2-point strap.

Also combines with the MS1® MS3® adapter or the MS1® MS3® QD adapter for a 2-1 point convertible strap.

Cheek clip for MOE and CTR butts.

Raises the position of the cheek by 6.35mm, 12.7mm or 19.05mm depending on the model.

This backrest is intended for applications other than AR15/M4 weapons as the backrest interferes with the arm lever function.

Originally designed for M14 rifle butt conversions.

Magpul strap for picatinny rail, 

live directly on the picatinny rail of your handguard.

The MOE-K2+ handle combines a reinforced polymer body with a comfortable and enveloping rubber overmolding for maximum weapon control in harsh environments.

The MOE-K2 is an upgrade for the AR15/M4 that offers a more vertical grip angle, but in a normal size handle design.

The more pronounced vertical grip angle is optimized for PDW (Personal Defense Weapon) configurations and improves the comfort and control of the short butt rifles that bring the main hand closer to the shooter’s body.

With rubber overmolding for positive weapon control, compatibility with optional Storage Cores for equipment storage, and a unique rear band design for correct finger placement on the trigger, the K2+ brings a modern style, ergonomics and comfort at the AR platform.

The MOE-K2 AK Grip is an upgrade for AK47/AK74 platforms that offers a more vertical grip angle, but in a normal-sized grip design.

The vertical grip angle improves comfort and control over these rifles has shorter butt that bring the main hand closer to the shooter’s body.

With an aggressive TSP texture for positive weapon control, compatibility with optional Storage Cores for equipment storage, and a unique rear band design for correct placement of the trigger finger, K2 brings modern style and ergonomics to the AK platform.

The Magpul Mil-Spec (Adaptable Carbine Stock - Light) is a replacement stock for AR15/M4 rifles using Mil-Spec size butt tubes. A simplified version of ACS, the ACS-L uses the same central storage compartment and the same cheek weld but removes the battery tubes for a finer and lighter set.

The MOE AK handle is designed to improve ergonomics and has an aggressive TSP texture for effective weapon control.

With a single-piece polymer construction and compatibility with Magpul "Grip Cores" for storage customization, this 24° tilt MOE grip is a welcome addition to the iconic AK platform.

The Paraclip QD adapter adapts to push-button QD swivel sockets to allow the use of Paraclips and other clip sling accessories. Made of precision casting Melonite™ finished steel.